Dental Impression Mixing Dispenser gun/silicone mixing tip
|Used for dental silicone gels|
|High Performance for Impression|
1,Open the top of the dispenser and then pull the rack to reach the
2, Put into impression material cartridge, and lock it by the
3, Promote the trigger to make the impression material come out
smoothly from the cartidge
4, After using, put the rack back to the original location.
5, Remove the cartridge, then to repeat the above operation.
No need Power and Air Pump. It is completely operated by hand,
leggiere-design and easy to be taken. It is used for catalyst with
mixing impression materials, silica gel or self-solidifying
compound resins etc. The ratios of dispensing guns include 1:1/2:1,
4:1/10:1, with cream-colored gun body and black push rod.
Two-component dispensing guns can avoid pollution when it is used
for mixing adhesives, fast-occlusion silica gel and various
Suggested Use Materials:
*Epoxies, Acrylics, Silicones, Polyesters.
*Epoxy Acrylates, Hybrids, Urethanes.
*Polysulfides, foams, MS Polymers, polyureas.
Any requirement of Dental Impression Mixing Dispenser gun/silicone
mixing tip dispenser gun,please feel free to contact us: