|
[China]
Trade Verify
Address: i City, No11, TangYan South road, Yanta District, Xi'an,Shaanxi,China.
Contact name:Evelyn Wang
Xi'an Kacise Optronics Co.,Ltd. |
|
Verified Suppliers
|
|
|
split type of Open flow ultrasonic open channel flowmeter
Application field
Ultrasonic open-channel flow meter is used with weir tank to
measure the water flow rate in the open-channel. This meter is
mainly used to measure sewage plants, sewage outfall of enterprises
and institutions, city sewer flows and irrigation channels.
As the meter use the ultrasonic wave through air do the measurement
with a non-contact method. Therefore, the meter has a higher
reliability than other forms of the instrument, when under the
dirt, corrosive liquids case.
Specification
Functions | Integrated type | Split type |
Measurement range | 0.1L/s~99999.99m3/h | |
Total flow | Max.: 4290000000.00m3 | |
Max. scale value of water level | 3m, 0.40m for dead area | |
Measurement accuracy of water level | 0.5% | |
Resolution ratio | 3mm or 0.1% (the larger one shall be taken) | |
Display | LCD display | |
Flow measurement accuracy | 1~5% for standard weir flume (wire flume and channel complied with national standards); 10~50% for non-standard weir flume | |
Analog output | 4-wire, load of 4~20mA/600Ω | |
Relay output | (Optional) 2 sets AC 220V/ 8A or DC 24V/ 5A | |
Power supply | Standard 24VDC 100mA; or optional 220V AC+15% 50Hz | |
Power supply | (Optional) 12VDC, supplied by battery or solar energy | |
Working temperature | display instrument -20~+60°C, probe -20~+80°C | |
Working pressure | Standard atmospheric pressure | |
Working temperature | ≤90%RH, non-condensed | |
Process temperature | -20~+80℃; | |
Process pressure | Standard atmospheric pressure | |
Communication | Optional, 485 & 232 communication, MODBUS protocol | |
IP grade | Meter IP66, probe IP68 | Meter IP66, probe IP68 |
Probe cable | None | Standard 10m, max. 100m |
Probe installation size | M78×2 thread is the first chose, with small transmitting angle and small blind area of 20cm. G1-1/2 thread + matting thread, and M48×2 thread + matting thread are optional, with blind area of 30-40cm. | |
Probe material | Standard made by ABS, and anticorrosive material shall be used for ones for the corrosive environment | |
Power dissipation of split type | The split type is provided with 24V power, with power dissipation of 100mA for ones without relay, 120mA for ones with one relay, 145mA for ones with two relays, 170mA for ones with three relays, and 190mA for ones with four relays. The specific power is as below: Product without relay: 24×100mA=2.4W; Product with one relay: 24×120mA=2.9W; Product with two relays: 24×145mA=3.5W Product with three relays: 24×170mA=4.1W; Product with four relays: 24×190mA=4.6W; | |
Power dissipation of integrated type | The integrated four-circuit type is provided with 24V power, with power dissipation of 80mA for ones without relay, 105mA for ones with one relay, 105mA for ones with two relays. The specific power is as below: Product without relay: 24×80mA=1.9W; Product with one relay: 24×105mA=2.5W; Product with two relays: 24×145mA=3.1W | |
Note: This series of ultrasonic flow meter probe can also be customized according to customer demand: high pressure, high temperature, small caliber, small blind and other special specifications available.
Xi'an Kacise is certified by ISO 9001-2008, GJB 9001B-2009, CE, intrinsic safety explosion-proof and isolated safety explosion-proof, etc. which assure our products are conform to the international standards.
We have been specializing in manufacturing pressure, level and flow measuring instruments and related products for 10 years. We have experienced technical and management personnel, through the efforts of our entire staff, we have become a professional measuring instrument manufacturer and solution provider. And we are continuously trying to improve product quality.
Currently, Kacise sensor is already exported to America, Spain, Australia, Chile and 20 other countries and regions, and received many favorable feedbacks. Our overseas distributers are also increasing. We regards “reasonable prices, efficient production time and good after-sales service” as our tenet, and hope to cooperate with more customers for mutual development.
1. Q: What information need to be provided to choose the suitable model?
A: Please provide us: remote or compact type, power supply, output signal, application field, so we
can choose model and quote for you quickly.
2. Q: Are you a trade company or a manufacturer?
A: We are an ISO approved manufacturer specialized in level and flow measuring instruments.
OEM & ODM service are available. Welcome to visit us.
3. Q: What is your MOQ for the ultrasonic open channel flowmeter?
A: To start our cooperation, sample order is acceptable.
4. Q: What is your delivery date?
A: The delivery date is about 3-15 working days after receipt of payment.
5. Q: What is your payment terms?
A: We support T/T, PayPal and Trade Assurance.
For mass production order, it is 30% deposit in advance and 70% balance before shipment.
6. Q: What is Trade Assurance payment method:
A: It’s a free service which can protect your orders from payment to delivery.
And we now have USD104,000.00 of caution money to assure your orders.
7. Q: Do you have a warranty for the ultrasonic open channel flowmeter?
A: Yes, we have the warranty of 12 months.
