Home Companies Xi'an Kacise Optronics Co.,Ltd.

Clamp On Handheld Ultrasonic Flow Meter No Pipe Cutting With Built In Printer

Contact Us

[China]

Trade Verify

Address: i City, No11, TangYan South road, Yanta District, Xi'an,Shaanxi,China.

Contact name:Evelyn Wang

Xi'an Kacise Optronics Co.,Ltd.

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

Clamp On Handheld Ultrasonic Flow Meter No Pipe Cutting With Built In Printer

Country/Region	china
City & Province	Shaanxi
Categories	Electric Wrenches

Product Details

Without Cutting Pipe Clamp On Portable Handheld Ultrasonic Flow Meter With Built-in Printer

Introduction

KUFP2000 ultrasonic flow meter is designed to measure the fluid velocity of liquid in a full/closed pipe. It is a portable measurement system which is both easy to install and use, which is ideal for flow surveys. Built-in SD card and printer can timely or regularly print pre-set measuring results. Temperature and heat can also be measured by connecting clamp on temperature sensor.

The KUFP2000 operates according to the difference in the transit time of flight measured, and determines the flow velocity by measuring the travel time of a pulse from one transducer to the next. Flow in the same direction takes less time to travel to the second transducer than does flow in the opposite direction. Electroacoustic transducers receive and emit brief ultrasonic pulses through the liquid of the pipe. Transducers are vertically placed at both sides of the measured pipe. Sensors are placed on the pipe and fastened by means of a clamp. The display will quickly show the flow velocity.

The KUFP2000 can be used for metallic, plastic and rubber tubes.

Features

1% accuracy.
Non-contact to liquid measurement, so non-conductive, corrosive, explosive liquid can be measured.
Wide range for various application fields. (DN32-DN6000)
Portable handheld host meter with clamp-on sensors measure liquid flows nearly anywhere.
Built-in SD card and printer can timely or regularly print pre-set measuring results.
No mechanical drive in ultasonic flowmeter, parts are rarely damaged. Maintenance free and long operating life.
Easy and quick installation. Save time with no pipe cutting or process shutdown.
No obstruction measurement, no pressure loss.

Specifications

Items	Performance and Parameter
Main unit	Principle	Transit time measure, 4 bytes of IEEE754 floating point arithmetic
	Accuracy	1 %
	Display	Support English, Italian, Chinese, etc.
	Signal output	1 channel 4-20mA current output 1 channel pulse width is adjustable between 6~1000ms, 200ms(default) 1channel relay output
	Signal input	3 way 4-20mA input,, acquire signals such as temperature, press and liquid level.
	Signal input	Achieve to heat measurement by connecting the temperature transducer PT100.
	Data port	RS485 serial interface, upgrade the flow meter software by computer, support MODBUS
	Data Record	Thermal printer, external SD card(2G of capacity)
Pipe Installation Condition	Pipe Material	Steel, Stainless steel, Cast iron, Copper, Cement pipe, PVC, Aluminum, Glass steel product, liner is allowed.
	Pipe Diameter	32~6000mm
	Straight Pipe	Sensor installation should be satisfied: upstream 10D, downstream 5D, 30D from the pump.
Measuring Medium	Type of Liquid	Single liquid can transmit sound wave, such as water, sewage, oil, chemicals, plant effluent, beverage, ultra-pure liquids, etc.
	Temperature	-30℃~160℃
	Turbidity	Less than 10000ppm, not so much baubles
	Flow speed	0 ~±10m/s
Working ambient	Temperature	Host: -20~60℃ Sensor: -30~160℃
Working ambient	Humidity	Host: 85% Sensor: IP67
Power supply	8 built-in Ni-MH batteries 1.2V(for over 20 hours of operation). Could operate 8 hours by connecting 4-20mA signal output. 90V - 260V AC adapter
Power dissipation	1.5W