Active Member
|
[China]
Address: Building 2, No. 1, Xiaoqianlu 2nd Street, Qiaotou Town Dongguan Guangdong
Contact name:Elaine Chen
Dongguan Chanfer Packing Service Co., LTD |
|
|
Friction Feeder With Bundling And Weighing Machine
Project name:
Friction feed+pushrod conveyor+conveyor weight sorting machine+sinking rejection machine
1. layout line:
2, Processes:
3, Bundling speed 8-12pack/min,friction feeder feed 20pcs each time
4, To make it convenience to copy quantities and weight of product for recording, make output port from weight sorting machined
5, Sorting machine could show 3 types of lights, when quantities less than customized quantities showing yellow,when equal showing green, when more than showing red.
6, Before shipping, make sure the whole machine clear, no obvious burst
FK-300 specification:
1. Card speed: up to 500pcs/min, depend on size of card
2. Card thickness:0.1~3mm
3. Card Width:110-300 mm (can be customized according to requirements)
4. Card Length:50-300 mm (can be customized according to requirements)
5. Machine size: 620*670*700mm
6. Machine net weight:35kg, gross weight: 64kg
7. Power:220V/450W
8. Power control system:
9. Mitsubishi Servo motor drive PLC control
| Model | FK-300 |
| Card speed | up to 500pcs/min, depend on size of card |
| Card thickness | 0.1~3mm |
| Card Width | 110-300 mm (can be customized according to requirements)
|
| Card Length | 50-300 mm (can be customized according to requirements) |
| Machine size | 620*670*700mm |
| Machine net weight | 35kg |
| Power | 220V/450W |
| Power control system | Mitsubishi Servo motor drive PLC control |
Bundling machine:
| Model No | WK02-30ABS |
| Applicable tape | paper & OPP film |
| Material:width*thickness | 29-29.5MM x 100-130mic |
| Roller size: core diameter*length | 40mm x 500-800M |
| Arch size :W*H | 470 x 200mm |
| Strap size | Max 450 x 200 Min 40 x 40mm |
| Power supply | 220V 50HZ |
| Control system | LCD control box |
| Strapping speed | 2.3s/piece(excluding conveyor transport time),pack single piece about 12-15piece/min |
| Strapping tension | 5-40N |
| Machine dimension | L590*W525*H1235mm |
| Net weight | 85KG |
| Welding method | Heating sealing |
CF-7H HIGH SPEED CHECK WEIGHER
l The open stainless steel framework provides easy access for thorough cleaning. No need tools to remove the conveyor, simplifying clean-up procedures and reducing clean-up time.
l The memory card can store up to 100 operating parameters to minimize operator errors and reduce production downtime during changeovers.
l Bright and clearly touch screen text promotes error-free production control for maximum weighing performance.
Integration with upstream and downstream equipment centralizes management of system
data to optimize productivity of the line.
l Corrective control signals from the check weigher to the upstream auger filler increase productivity.
l Check weigher/metal detector combination units provide additional quality control in one space-saving system.
l Frame with IP 54 protection .
Specification:
| Model No | CF-7H |
| Weighing range | 30 ~ 1000g |
| Maximum speed | 150b/m |
| Weighing accuracy | ±0.5~1.5g |
| Middle weighing belt size | L:450mm x W:220mm |
| Minimum scale | 0.1g |
| Target weight | 0.1 ~ 1000.0g |
| Conveyor belt speed | 5-150 m/min |
| Preliminary program | Maximum 100 sets |
| Rejector | Blower device/T-push device/Two-way swing arm device/Slide down device |
| Power | 100 - 240VAC 250W 50/60Hz , single phase |
| Note:Accuracy is finally decided by the size &weight of product ,package type and speed. | |
