OEM Service Domestic Floor Cleaning Machine No Sanding Marks Up To 14Kpa

OEM Service Domestic Floor Cleaning Machine No Sanding Marks Up To 14Kpa

Product Description

1. Used in staircase, house and small areas;

2. Multi- purpose machine to strip, wax, buff, sand and refinish your surface floor and even dry clean your carpet whether you have marble, vinyl, wood or carpet;

3. No torque, no brush marks, no sanding marks, no swirls, no experience needed to operate

4. Lightweight, so it is easy to take anywhere. Because of the larger orbit, you can clean faster with less weight.

5. Engineered for quiet and smooth operation.

Spec:

1. BLDC motor, 150W with rotating speed 80000 rpm
2. 0.8L Dust capacity
3. Speed control
4. Up to 14Kpa vacuum
5. Working time up to 30 Min
6. Charging time:4-5H
7. Noise≤68db

Product Uses

Press both sides of screw box inwards and pull it out; take out screw by impact. Align the mounting hole of control handle with the mounting hole of chassis, install the screw and tighten the nut; Put screw box into on chassis.

Keep pad holder or brush flat on the floor, take hold of chassis and lift machine with both hands, align brush holder pad with pad holder or brush, push chassis hard, make pad holder or brush level and place it properly.

Lay the machine on its back with the handle lying on the floor; Turn over chassis backward and shown pad holder or brush, remove pad holder or brush on the brush holder pad.

Rotate the handle to the highest point, insert the pin in the special-purpose hole of motion, hold tight handle and makes the two wheels drop to the ground, than can push or pull the machine to move.