Gypsum Based Plaster, Gypsum Powder Calcium Sulfate 100% Water
Soluble, BTO Gypsum Powder Stock On Line
Plaster Based Ready Hand Machine Plaster
(The First Plaster Based Interior Machine Plaster Produced in
Turkey)
APPLICATION FIELD
It is applied on brick, aerated concrete, concrete, exposed
concrete, pumice concrete, briquette wall and ceiling surfaces in
indoor and outdoor for plaster application.
REQUIREMENTS
It forms solid floor thanks to high adhesion and resistance
strength.
APPLICATION
SURFACE PREPARING
The surface should be free of paint, dust, and adherence reducing
substances.
The repair of crack and holes should be done appropriate Entegre
Repair Mortar before application.
If necessary, application surface should be moisten with water
before application.
It's used as adherence enhancing primer before application of
PRİMEL 600® on bright gross surfaces, concrete ceiling and walls.
After it is dried, application begins.
MORTAR PREPARING AND APPLICATION
Plaster is mixed with plastering machine (15- 16 lt water/35 kg
bag) and sprayed on surface.
Application thickness should be between 1 cm and 2,5 cm in one
layer.
If the thickness is more than 2.5 cm, second floor is applied
maximum 2.5 cm thickness after first floor setting.
Surface is gauged.
When the surface begins to cry, the surpluses on the surface can be
collected by second gauging.
Then, a spatula is used for compression and correction.
When the surface reaches a sufficient hardness, the sponge trifle
is drawn by wetting it slightly and the satin surface is collected.
Depending on the ambient temperature, the satin on the surface
begins to dry, then a steel trowel is drawn to obtain a perfect
surface.
If the application surface is to be scratched on the gauge, the
surface must be compacted.
CONSUMPTION
For 1 cm thickness, 10,0 kg/m²
TECHNICAL VALUES
Compressive Strength, N/mm² ≥ 2.0
Bending Strength, N/mm² ≥ 1.0
Adherence Strength (In dry conditions), N/mm² ≥ 0.3
Set Beginning Time, minute >50
Reaction to Fire A1
PACKAGING AND STORING
• It can be delivered as pallet or sling-bag in 35 kg PP bags if
requested.
• It is recommended to be consumed that within 6 months from the
production date and within 1 week after the bag has been opened,
provided that it is put in a maximum of 8 rows in its original
package without being opened in a dry and frost-free environment.
WARNINGS
• No foreign substance (lime, cement, gypsum etc.) should be added
in the prepared mortar.
• Application is recommended to be done
at a temperature of +5 °C degrees to +30 °C degrees.
• ALÇIMATİK® should be protected against rapid drying in windy
weather.
• For the applications on ALÇIMATİK®, at least 10 days should be
waited depending on environment temperature.
• Plaster net should be used in joints of different materials and
places with motion.
• Comply with the specified application area and operating
instructions.
• Do not breathe directly. In case of contact with eyes, wash eyes
with plenty of water, if needed, seek medical advice.
• Please request the safety data sheet for more information.
• Please consult us for all other application conditions and
technical questions.
Production Equipment and Lab Corner
