Active Member
|
[China]
Contact name:Lisa
Anhui Sinomining Machinery Co., Ltd |
|
|
Zg Peripheral Transmission Mud Scraper Concentrator For Tailings Treatment
Introduction
Thickener is generally used for concentrate concentration and dewatering of tailings before thickener filtration. The slurry concentration can be concentrated from a thinner state to a thicker degree, from 20-30% to 40-70%. It is widely used for concentration and purification of solid material slurry in beneficiation, coal, building materials and other industries.
ZG peripheral mud scraper mainly includes steel beam, overflow
weir, transmission device, steady flow cylinder, central mud tank,
mud discharge tank, mud scraper, mud suction device, Scum
Collection and discharge facilities, power transmission and gas
transmission device, etc.
The water to be treated enters from the inlet pipe of the central
pipe, flows into the sedimentation tank through the steady flow
pipe, and then diffuses and settles around. The clean water flows
out of the overflow weir at the side of the pool, and the sediment
is concentrated to the suction port by the scraper. The compressed
air disturbs the mixing, increases oxygen and increases the
activity of sludge. According to the principle of connecting pipe,
the sludge at the bottom is sucked into the sludge discharge tank
through the water level difference and discharged into the central
pipe sludge discharge pipe through the siphon. At the same time,
the scum in the tank is collected by the scraper and discharged out
of the tank through the slag bucket.
Parameter
| Models and specifications | ZG-16 | ZG-18 | ZG-20 | ZG-22 | ZG-24 | ZG-25 | ZG-28 | ZG-30 | ZG-35 | ZG-37 | ZG-40 | |
| Applicable tank diameter (m) | 16 | 18 | 20 | 22 | 24 | 25 | 28 | 30 | 35 | 37 | 40 | |
| Motor power (kw) | 1.1 | 1.5 | 2.2 | 3.0 | ||||||||
| Speed of scraper board at the margin | Primary setting tank | 2-3 | ||||||||||
| Secondary setting tank | 1.5-2.5 | |||||||||||
Embedded and civil engineering conditions (m)
| D1 | 2800 | 2800 | 3000 | 3000 | 3500 | 4000 | 4000 | 4200 | 4200 | 4500 | 4500 |
| D2 | 1350 | 1400 | ||||||||||
| H1 | 1800 | |||||||||||
| a | 1200 | 1200 | 1400 | 1400 | 1400 | 1400 | 1800 | 1800 | 2000 | 2000 | 2000 | |
| b | 800 | 800 | 900 | 900 | 900 | 900 | 1000 | 1000 | 800 | 1000 | 1200 | |
| c | 280 | 280 | 300 | 300 | 300 | 300 | 320 | 320 | 280 | 320 | 350 | |
| d | 200 | 250 | ||||||||||
| H2 | 700 | 700 | 800 | 800 | 800 | 800 | 900 | 900 | 900 | 1000 | 1000 | |
| e | 700 | 700 | 800 | 800 | 800 | 800 | 900 | 900 | 900 | 900 | 1000 | |
| Load (t) | P | 4.0 | 4.5 | 5 | 5.5 | 6 | 6.5 | 7 | 8 | 9.5 | 11 | 11.5 |
| W | 4.5 | 5 | 5.5 | 5 | 5.5 | 7 | 7.5 | 8.5 | 10 | 11.5 | 12 | |
Why choose our company machine?
Q1: Hi, are you a mining machinery manufacturer?
Answer: Yes, we are a professional manufacturer of mining machine.
Our company welcomes customers to visit our factory at any time.
Q2: How long is the warranty period of your equipment? Does your
company provide spare parts?
Answer: The warranty period of our machine is one year. For those
wearing parts, we guarantee to provide high-quality parts for a
long time.
Q3: How long does it take to deliver?
Answer: Production usually starts after receiving the advance
payment. Small machine is guaranteed to be delivered within one
month. Large-scale machine is guaranteed to be delivered within 2-3
months.
Q4: Do you provide machine operation guidance?
Answer: Yes. We have professional engineers for installation,
commissioning and operation guidance.
