1.1kw ZG Peripheral Transmission Mud Scraper Mining Thickener For Processing Plant

Mining Thickener ZG Peripheral Transmission Mud Scraper for Processing Plant

Introduction

The concentrator is generally used for concentrate concentration and tailings dewatering before filtering in the concentrator. The slurry concentration can be concentrated from a thinner state to a thicker degree, from 20-30% to 40-70%. It is widely used in the concentration and purification of solid material slurry in mineral processing, coal, building materials and other industries.

ZG peripheral transmission mud scraper is mainly composed of central slewing bearing, rotation frame, scraper and scum board, current collecting device, driving mechanism, track and traveling wheel, etc.

Its working mechanism is as follows: raw water flows out from the tank bottom via the central buttress; after water distribution by draft tube, the effluent is discharged to the catch basins around the tank in radiating pattern; with the reduction of flow rate, the suspended matters in the raw water are separated and deposited to the tank bottom. The rotation frame takes the central bearing as the circle center; under the function of driving mechanism, the travelling wheel at the end rotates along the peripheral tracks, driving the scraper board which rotates slowly under it along a near log spiral moving trajectory; the scraper board scrapes the mud to the mud catch basin at the center of setting tank, then the mud is discharged out of the tank by hydraulic pressure or pump while the scum on the top is scraped to the scum hopper by scum board and then discharged.