Inline Flexo Folder Gluer Machine Box Folder Gluer Machine From
China Fully Computerized Control With High Speed
General Specifications
- TP-CR Series open & close type flexo folder gluer represents of
Quality, Consistency, Efficiency and Economic.
- High speed inline top flexo print casemaker with down folding
provides a complete carton boxes producing solutions.
- The machine is designed and made to high quality and safety
standard, stable and consistency high printing quality maximize the
production efficiency.
Main Parameters
| Parameters Model | 0920 | 1224 |
| Max.Sheet Size (FxA) | 890x2000 | 1190x2400 |
| Skip Feed Size (FxA) | 1200x2000 | 1400x2400 |
| Min.Sheet Size (FxA) | 280x780 | 380x780 |
| Max.Printing Area (FxA) | 890x2360 | 1190x2360 |
| Top Speed (Sheet/min) | 300 | 250 |
| Economic Speed (sheet/min) | 120-250 | 120-200 |
| Max. Slot Depth Size | 300 | 300 |
| Min. Box Height Size (E) | 110 | 110 |
| Max. Die-Cutting Area (FxA) | 850x2350 | 1150x2350 |
| (Max. size) (B+C) | ≤980 mm | ≤1180 mm |
| (Min. size) (B+C) | ≥370mm | ≥380mm |
| (Max. size) (B) | 880mm | 1030mm |
| (Min. size) (B) | 270mm | 280mm |
| (Max. size) (C) | 710mm | 900mm |
| (Min. size) (C) | 100mm | 100mm |
| (Glue Flap Width) (D) | ≤40mm | ≤40mm |
| Sheet Thickness | 1.5-11 | 1.5-11 |
| Printing Plate Thickness (Sponge + Film + Plate) | 7.2 | 7.2 |
| Main Working Power (KW) | Flexo Printer + Inline | 70+40 | 70+40 |
| Total Power(KW) | Flexo Printer + Inline | 100+51 | 100+51 |
| Dimension (mm) | Flexo Printer | 10500x5000x2530 | 10500x5200x2630 |
| Inline Folder Gluer | 14300x2500x2650 | 14300x2600x2650 |
| Frame Thickness | Flexo Printer | 60mm | 60mm |
| Folder Gluer | 40mm | 40mm |
FEEDING SECTION
- PLC control with HMI touch screen for operation.
- Lead edge feeder with 3-4 shafts feeding box, benefits for all kind
of cardboard.
- Dust collection system use 4 suction blowers with groups of
brushes.Anti-static dust removing system Optional.
- Servo Control Non-crush feeding system Optional.Skip feeding device
in order to produce large boxes.
- Side baffles are computerized control or by order management.lFront
guide is quickly manual adjusted, and backstop is motorized
control.
- Two groups of feeding roller, upper roller covered with rubber,
lower roller engraved with slot
- Motorized units open and close with alarm.
- Gaps are motorized control with digital display.
- Frequency inverter drive with variable suction control.
PRINTING SECTION
- PLC control with HMI touch screen for operation.
- Top print, Vacuum transfer system is coated with durable ceramic
for longer life time.
- Vacuum transfer system greatly improves the printing accuracy and
would overcome warp boards issues.
- Rubber and Anilox roller are made of A-class seamless pipe.
- USA ARO diaphragm ink pump.
- Auto zero- set for printing position.
- All vacuum transfer wheel bearings with independent grease fitting
for lubrication.
- Servo control of register.
- Automatic washing system.
- Laser engraved ceramic anilox roll, 250-350LPI.
- Rubber Roller as standard, and chamber blade system is Optional,
Doctor blade “Chamber” type would be suggested for high quality
printing, hence this would also be a cost saving on the ink
material.
- Surveillance System for checking cardboard transmission situation.
SLOTTER CREASER SECTION
- PLC control with HMI touch screen for operation.
- 8 shaft structure, pre-creasing, big-creasing, thin-creasing,
slotting.
- Slotting boss and Creasing wheels are simultaneously co-adjusted
for keeping cutting accuracy and avoiding slotting knife worn away.
- Gaps adjusted computerized control with digital display.
- Slotting boss movements adopts linear guiding system match with
ball screw,
- Slotting boss adopts opposite insert structure, stable moving.
- Dual slotting system Optional.
- Auto zero- set for slotting knife.
- Slotting Register servo control.
- Middle knife movement.
- smooth movement.
DIE CUTTER SECTION
- PLC control with HMI touch screen for operation.
- Die-cutting cylinder adopts Heavy duty structure.
- Servo control of register.
- Speed compensation device system allow operators to adjust the
speed ratio between anvil and die mould cylinders.
- With automatic grinding system.
- Automatic back to zero position.
FOLDER GLUER & COUNTER EJECTOR
- PLC control with HMI touch screen for operation.
- Top printing with down folding.
- Independent servo control of folding gluer side belts, speed can be
adjust freely.
- Independent servo control of guiding wheels for tracking box
folding edge to make sure accurate folding.
- Main belts with vacuum blower for accurate transmission.
- Full servo control of counter ejector jobs to make sure precision
counting and ejecting.
For more infomation, please feel free to contact with us!
THANK YOU!!!
