High Speed Corrugated Carton Box Folder Gluer Machine, Flexo Folder
Gluer For All Kind Of Carton Boxes Making 900x2000mm, each to match
with auto pre-feeder and automatic strapping machine, save labor
cost and work space.
GENERAL SPECIFICATIONS
- Automatic corrugated board multi-color printer slotter die-cutter
machine, is the must need in the paper box package industry, that
is easy operation and save the labor and save the cost, and this is
the most popular machines in current carton box factory.
- It adopts centralized computer control and servo independent drive;
it can connect to the whole plant ERP management system.
- A safety emergency protection switch is set between the operation
surface and the unit, and the moving button is prohibited for each
unit.
- The PLC program controls the servo drive to ensure the stability
and reliability of the operating data.
- The whole machine has multiple touch screen controls, which can
store common orders, and it is more convenient and quicker to
change orders.
MAIN PARAMETERS
| Parameters
Model | 0920 | 1224 |
| Max.Sheet Size (FxA) | 890x2000 | 1190x2400 |
| Skip Feed Size (FxA) | 1200x2000 | 1400x2400 |
| Min.Sheet Size (FxA) | 280x780 | 380x780 |
| Max.Printing Area (FxA) | 890x2360 | 1190x2360 |
| Top Speed (Sheet/min) | 300 | 250 |
| Economic Speed (sheet/min) | 120-250 | 120-200 |
| Max. Slot Depth Size | 300 | 300 |
| Min. Box Height Size (E) | 110 | 110 |
| Max. Die-Cutting Area (FxA) | 850x2350 | 1150x2350 |
| (Max. size) (B+C) | ≤980 mm | ≤1180 mm |
| (Min. size) (B+C) | ≥370mm | ≥380mm |
| (Max. size) (B) | 880mm | 1030mm |
| (Min. size) (B) | 270mm | 280mm |
| (Max. size) (C) | 710mm | 900mm |
| (Min. size) (C) | 100mm | 100mm |
| (Glue Flap Width) (D) | ≤40mm | ≤40mm |
| Sheet Thickness | 1.5-11 | 1.5-11 |
| Printing Plate Thickness (Sponge + Film + Plate) | 7.2 | 7.2 |
| Main Working Power (KW) | Flexo Printer + Inline | 70+40 | 70+40 |
| Total Power(KW) | Flexo Printer + Inline | 100+51 | 100+51 |
| Dimension (mm) | Flexo Printer | 10500x5000x2530 | 10500x5200x2630 |
| Inline Folder Gluer | 14300x2500x2650 | 14300x2600x2650 |
| Frame Thickness | Flexo Printer | 60mm | 60mm |
| Folder Gluer | 40mm | 40mm |
FEEDING SECTION
- The advanced feeding system adopts Lead Edge Feeder, Non-crush
Feeding system Optional.
- 3-4 dust blowers was adopted for dust and scraps remove, with two
groups of feeding brushes.
- Right and Left side baffle are automatically adjustment with order
management.
- Quickly change device adopts for Rubber wheel, easy for replace.
- Main motor with protection system, when units not close, machine
will not be running.
PRINTING SECTION
- Printing wheel (printing plate form wheel) phase position adjust by
planet wheel, twirl 360°adjust electrically, it can stop at
operation or stop. PLC control system, setups are return to zero,
scrape form memory, automatic reset and phase position adjust after
entering values.
- Transverse movement of Printing Cylinder is ±5MM. printing surface
with scale mark make hang form and distance measurement easily.
- Install foot pedal control the rotate of cylinder. It is easy to
change form, scrape form and pull switch so as to ensure staff
safety.
- Anilox roller use “Brightas” to ensure ink distribution effect and
printing quality.
- Rubber shaft use Taiwan Jingyang, waist drum type, good ink
distribution effect and good printing quality.
SLOTTER CREASER SECTION
- With single shaft type slotting, the height of box and phase
position will be adjusted electrically. PLC system have automatic
knife slotting, restore orders and so on functions, it makes
slotting more convenience and high efficiency.
- Synchronous tool apron is made of high-precision screw with a
linear slide rail, which can move left and right stably and
precisely so that the slotting cutter can be adjusted smoothly.
- The copper folk of cutter is designed for automatically
compensating gap device, which prolongs the service life of copper
fork.
- Multiple-spacing device is installed in case of knife collision.
- Automatic inflatable paper-carving knife.
DIE CUTTER SECTION
- Frequency control of Independent motor for Line Speed Compensation
of Anvil Cover, which can track the line speed of Die cylinder, to
make sure the upper and lower roller running at same speed.
- With automatic grinding system for anvil rapid use.
- Register servo Control, more precision and accurate.
- Rubber mat moves from left to right. It can adjust main machine
operation
FOLDER GLUER & COUNTER EJECTOR
- Top printing with down folding.
- Both side folding side belts independent servo control.
- Main transmission belts with suction fan for accurate transmission.
- Paper insert arm, paper press arm, paper holding device,
- Upper suction belt with down folding for stable performance.
- Whole paper holding device transmission and counter ejector belts
all servo control for accurate counting and ejecting.
- Top loading device for receiving and stacking boxes.
- USA VALCO gluing system
- Quick positioning via AC servo control.
- Full integrated construction with HMI control device.
For more information, please feel free to contact with us.
THANK YOU!!!
