Fleibig Completions Tools Co. Ltd. |
|
MODEL'KL'SLIDING SLEEVE Product No. Kl 810-04
The Model 'BL1 Sliding Sleeve is a downhole flow control device
mounted in the Production Tubing. It effectively controls flow
between the tubing and casing annulus, by means of an internal
sleeve that is opened or closed by standard wireline methods.
APPLICATIONS
Sliding Sleeves may be used to establish Tubing to annulus
communication forfollowing operations:
Displacing the Tubing or annulus fluid after X-mas tree
installation. For testing, treating and production of individual
zones in a multi-zone selective well.
For producing more than one zone through a single Tubing String.
For killing a well by circulation.
For Gas Lift.
For landing a Blanking Plug in Nipple profile to shut in well or
when testing Tubing.
For landing comingling chokes in nipple profile.
For circulating Inhibitors for corrosion control.
FEATURES
Simple, Positive Control - With a Model 'BL1 Sliding Sleeve,
establishing orclosing off tubing-to-casing annulus communication
is simple, dependable and quick. This type of product makes it
possible to close the ports without leaving any obstruction in the
Tubing once the shifting operation is completed.
Protected Closing Sleeve - The closing sleeve is recessed so that
there is no danger of opening orclosing the sleeve by mistake while
running Wireline Tools through or while seating a Flow Control
device in the Sliding Sleeve.
Run in Tandem - Any number of Model "L" Sliding Sleeves may be run
in tandem and still accept Wireline Flow Control devices.
Selective-type locks will pass through as many of the Sleeves as
the operator chooses and seat in any sleeve he selects.
Additional Seating Nipple - The Upper Sub of the Model 'BL1 Sleeve
has a Model 'BF1 Seating Nipple profile to land selective or Top
No-Go Locking Flow Control devices.
The lower seal sub has a honed bore that in combination with the
upper seating nipple can be utilized to land Separation Sleeves,
Chokes or Blanking Plugs.
SPECIFICATION GUIDE
Tubing OD | Seal Bore | Size(A) | Min OD' | |||
In. | mm | In. | mm | In. | mm | |
2-1/16 | 52,37 | 1.562 | 39,67 | 1.56 | 2.500 | 63,50 |
1.625 | 41,28 | 1.62 | ||||
2-3/8 | 60,33 | 1.781 | 45,24 | 1.78 | 2.910 | 73,91 |
1.812 | 46,02 | 1.81 | ||||
1.875 | 47,43 | 1.87 | ||||
2-7/8 | 73,02 | 2.250 | 57,15 | 2.25 | 3.410 | 86,61 |
2.312 | 58,72 | 2.31 | ||||
3-1/2 | 88,90 | 2.750 | 69,85 | 2.75 | 4.500 | 114,30 |
2.812 | 71,42 | 2.81 | ||||
4 | 101,60 | 3.125 | 79,38 | 3.12 | 5.000 | 127,00 |
3.250 | 82,55 | 3.25 | ||||
3.312 | 84,12 | 3.31 | ||||
4-1/2 | 114,30 | 3.688 | 93,68 | 3.68 | 5.500 | 139,70 |
3.750 | 95,25 | 3.75 | ||||
3.812 | 96,82 | 3.81 | ||||
5 | 127,00 | 4.000 | 101,60 | 4.00 | ||
4.125 | 104,78 | 4.12 | ||||
4.312 | 109,52 | 4.31 | ||||
5-1/2 | 139,70 | 4.562 | 115,87 | 4.56 | 6.050 | 153,67 |
6-5/8 | 168,28 | 5.500 | 139,70 | 5.50 | 7.390 | 187,71 |
7 | 177,80 | 7.656 | 194,46 | |||
7-5/8 | 193,68 | 8.500 | 215,90 |
(A)ODs shown are standard. Smaller ODs can be supplied on request.
SEPARATION SLEEVES FOR MODEL "KL" SLIDING SLEEVE
"KLSE" Product No. Kl 805-41
(Selective)
"KLGE" Product No. Kl 805-50
(Top No-Go)
Separation Sleeve used in the Model 'BL1 Sliding Sleeve is designed to SHUT off Tubing to annulus flow through the Sliding Sleeve should the Sliding Sleeve become inoperative. "Straight Through Flow" through the Separation Sleeve is accomplished by a chevron packing system that will seal off in the upper and lower seal bores, isolating the ports of the Sliding Sleeve.
The Separation Sleeve is also designed with an internal equalizing
plug to equalize pressure before retrieving.
MODEL "KLGE” SEPARATION SLEEVES SPECIFICATION GUIDE
Tubing OD | Seal Bore | Size | Max OD | To Run | To Equalize | To Pull | |||
“BC-1"Running Tool, Prod. No. Bl 811-06 | "N-1" Shank Prod. No. Bl 811-85 | "A" Gude Prod. No. Bl 811-71 | "A" Prong Prod. No. Bl 811-70 | Pulling Tool | "N-1" Probe Prod. No. Bl 812-13 | ||||
In. mm | In. mm | In. mm | |||||||
2-1/16 52,37 | 1.562 39,62 | 1.56 | 1.615 41,02 | 1.900 48,26 | 2-1 /16" 52,37 | 2-1 /16" 52,37 | 7/16 x 28" | JUC | 2-1 /16 52,37 |
2-3/8 60,32 | 1.781 45,24 | 1.78 | 1.865 47,37 | 2-3/8 60,32 | 2-3/8 60,32 | 2-3/8 60,32 | 1/2"x30" | JUC or JDC | 2-3/8 60,32 |
1.812 46,02 | 1.81 | ||||||||
1.875 47,63 | 1.87 | 1.928 48,97 | |||||||
2-7/8 73,02 | 2.250 57,15 | 2.25 | 2.302 58,47 | 2-7/8 73,02 | 2-7/8 73,02 | 2-7/8 73,02 | JUC or JDC | 2-7/8 73,02 | |
2.312 58,72 | 2.31 | 2.365 66,93 |
MODEL "KLSE" SEPARATION SLEEVES SPECIFICATION GUIDE
Tubing OD | Seal Bore | Size | To Run | To Equalize | To Pull | |||||
No-Go | "A" Gude Prod. No. Bl 811-71 | "A" Prong Prod. No. Bl 811-70 | Pulling Tool | "A" Probe Prod. No. Bl 812-06 | ||||||
Locatng Ring OD | “BC-T'Running Tool, Prod. No. Bl 811-06 | "A" Shank Prod. No. Bl 811-80 | HE" Selective Running Tool Bl 幽 1-17 | |||||||
In. mm. | In. mm. | |||||||||
In. mm. | ||||||||||
2-1/16 52,37 | 1.562 39,67 | 1.56 | 1.593 40,46 | 1.900 48,26 | 2-1/16"x4-3/4H | 1.900 48, | 2-1/16 52,37 | 7/16x28" | JUC or JDC | 1.900 48,26 |
1.625 41,28 | 1.62 | 1.656 42,06 | ||||||||
2-3/8 60,33 | 1.781 45,24 | 1.78 | 1.807 45,90 | 2-3/8 60,33 | 2-3/8X5" | 2-3/8 60,33 | 2-3/8 60,33 | 1/2" x 27-1/2" | JUC or JDC | 2-3/8 60,33 |
1.812 46,02 | 1.81 | 1.84 46,79 | ||||||||
1.875 47,63 | 1.87 | 1.906 48,41 | ||||||||
2-7/8 73,02 | 2.250 57,15 | 2.25 | 2.281 57,94 | 2-7/8 73,02 | 2-7/8x4-11/16" | 2-7/8 73,02 | 2-7/8 73,02 | 5/8" x 28-9/16" | JUC or JDC | 2-7/8 73,02 |
2.312 58,72 | 2.31 | 2.343 59,51 | ||||||||
3-1/2 88,90 | 2.750 69,85 | 2.75 | 2.781 70,64 | 3-1/2 88,90 | 3-1/2x5-5/16" | 3-1/2 88,90 | 3-1/2 88,90 | 5/8" x 35" | JUC or JDC | 3-1/2 88,90 |
2.812 71,42 | 2.81 | 2.843 72,21 | ||||||||
4-1/2 114,30 | 3.688 93,68 | 3.68 | 3.802 96,57 | 4-1/2 114,30 | 4-1/2X7" | 4-1/2 114,30 | 4-1/2 114,30 | JUC or JDC | 4-1/2 114,30 | |
3.812 96,82 | 3.81 | 3.843 97,61 |
Note : Separation Sleeves for all sizes of Sliding Sleeve Seal Bores available.B