Small Size Underwater LED Lights For Ponds Embedded Type 50°Beam Angle

Small Size LED Underwater Light Spotlight , 1Pcs Cree High Power LED DC24V

Quick Details

Description

This is a LED underwater light with 316 stainless steel.It can be installed as embedded type led underwater light and underwater spotight.We could provide you the 316 stainless steel mounting plate and PVC sleeve as you required.

The LED chip use high power CREE/EDISON/OSRAM 1W 3W LED,color could be single color and RGB 3in1.It's widely used in pool lighting.

Technical Datas

Dimension

Material & Manufacturing Technique

Housing:Molding shaped stainless steel sus316#.

Gasket:EPDM gasket

Glass:Tempered glass,T=7mm

Lens:Optional lens,efficiency ≥ 85%

Cable gland:IP68 PG-9 copper with nickel-coated.

Seal:Molding shaped silicone seal under the front cover

        Silicone gule among the LED,lens and PCB.

LED:High power LED

PCB:Excellent heat conductivity aluminum,coefficient of heat conductivity≥2.0w/mk

Driver:Constant current output

           Single color LED=2-circuit output

           RGB 3in1 LED=3-circuit output

Applicaation environment:Temperature of water between -20℃-40℃ less than 1m depth

Power cable:H07RN-F 2x1.0m² L=2m(for single color)

                      H07RN-F 4x0.75m² L=2m(for RGB)

Sleeve:061 PVC

Model Number Infos

Competitive Advantage

• Whole lamp is made of 316 Stainless Steel,PVC Sleeve and 316 stainless steel round base,high level quality LED underwaterlight.
• With 316 SS stand support frame,lamp lighting beam angle can be adjustbale.
• With round base and recessed sleeve,the light can be installed for recessed light and spotlight.
• High power CREE & Osram LED,W/WW/R/G/B/Y/RGB 3in1 color optional,meet diversified lighting color change.
• H07RN-F trong power cable length can be customzied.
• Professional 10 years manufacturing and exporting experience,keep good quality control and good after-sales service

Warm Tip & Warning 

1. The 316 Stainless Steel 1W 3W LED Underwater Lights With Recessed Sleeve And Round Base has to be lighted underwater to prevent the lamp from burnning up because of over-heat.Pls don't light it more than 15 minutes out of water!
2. The LED underwater light is 12V / 24V low voltage,pls don't connect it to 220V / 240V high voltage,this will burn the LED underwater light.
3.  The best height for this LED underwater light lighting is within 1M.
4. The power cable of this LED underwater light can be customized.
5. This LED underwater light has very lighting effect for fountain lighting project.

Photo Show

Application

Shopping mall,garden,park,lake,outdoor landscapes,water floor,water stage,fountain,pond,swimming pool