Active Member
|
[China]
Address: No. 1699, Shuichan road, Shanghai, China.
Contact name:Amy
Cimc Trailers For Sale in China - used and new |
|
|
A pneumatic tanker trailer is a large body tank trailer that
empties via a pump and forced air. It is primarily used to
transport building materials, food products, and chemical products.
In fact, dry bulk transportation is the transportation process for
dry materials. Most frequently these dry materials come in large
quantities. Thereupon, the dry bulk transportation includes hauling
from the place of materials’ origin, transportation, and unhaling
of the materials.
The dry bulk cement tanker trailer used for transporting cement is
a bulk powder transport vehicle made of a combined specially
designed chassis, pneumatic piping system, tanker and discharging
units. ... With the use of this type of trailer, packaging and
discharging costs are greatly reduced.
The main volumes of cement tanker trailer are 25/30/35/40/55/65 cubic meters. bulk cement tanker trailers are V-shaped and W-shaped, and the materials are carbon steel, stainless steel, and aluminum alloy.
The cement bulk tanker trailer discharge pipeline is mainly composed of a suction port, a butterfly valve, a discharge steel pipe, a discharge pipe joint, and a discharge hose.
Cement bulk tanker trailer Discharge hose: Abrasion-resistant steel discharge hose is used,
with a diameter of 100mm.
Butterfly valve: It is sealed by a rubber sealing ring, and the
rubber ring can be replaced after being worn out, without replacing
the entire butterfly valve, which can reduce the use cost.
An anti-seismic pressure gauge is installed on the tank body to
monitor the pressure change in the tank and to guide the discharge.
Cement bulk tanker trailer Auxiliary devices: including side protection, rear protection,
wheel cover, ladder, etc.
| Dimension: | 10000*2500*4000 mm |
| Tank Body | |
| Tank thickness | 4 mm |
| Front & end plate | 4 mm |
| Tank rated pressure | 0.2Mpa |
| Discharging System | |
| Diesel Engine | Model 4102 Diesel |
| Air Compressor | 12 m³ one unit double cylinders compressor |
| Discharging valve | 4 inch butterfly valve |
| Discharging pipe | 1pcs, 6m/each |
| Manholes | 2 pcs |
| Trailer Chassis | |
| Main Beam | Welded design, |
| Axles | 3 axles |
| Landing gear | 28T |
| Kin pin | 3.5 inch high tensile bolt-in king pin |
| Suspension | Mechanical suspension with 10 layers leaf spring |
| Tire | 12.00R22.5 , |
| Braking system | WABCO emergency valve; |
| Electrical system | Voltage: 24V |
| Tool box & tire carrier | One tool box , 2 pieces tire carrier |
| Light & reflector | Rear light, rear reflector, turn indicative light, side reflector,fog lamp,number plate light |
CIMC 40cbm dry bulk tanker for sale
CIMC 3 Axle 50Ton Cement Bulk Tanker Trailer
