Active Member
|
[China]
Address: NO 8001 JINGSHI EAST ROAD,JINAN CHINA
Contact name:Happle Hoo
GENERAL EAST CO.,LTD |
|
|
Honeycomb Core material with GRE Sandwich Panel Kits and Box for Dry Freight Truck Body
Honeycomb plate sandwich panel Design concept from H Shaped beam
structure: FRP surface means the Flanges to bear normal stress;
intermediate honeycomb layer means the main beam to bear the shear
stress.
1, Best Planeness
2, Easy installation
3, light weight with high-strength
4, Good Insulation
5, Long working life
Dry Freight truck Box or van trailers are the most common type. They are quite simply a metal or composite box on wheels with some doors on the back, though some offer additional access doors on the sides.
The Dry Freight truck body we supplied with composite panels, Core Material with XPS, Waterproof Plywood, Honeycomb, composited with Surface material of FRP, Aluminum Plate or Steel Plate for different Dry Cargo box demands.
| Honeycomb Core material with GRE Sandwich Panel Kits and Box for Dry Freight Truck Body | ||
| Composite Truck body type | FRP+Honeycomb plate+FRP Composite sandwich panel for Dry logistic Cargo Box | |
| Outside Dimension | L ≤16,000 mm, W&H≤ 2,600 mm | |
| Panel Structure | FRP+Honeycomb+FRP | |
| Unit Panel Density (kgs/㎡) | 6.81 | |
| K Value: W/〔㎡•K) | ||
| Front /Side /Rear/Roof panel Thickness (mm) | 30/30/30/30 | |
| Floor Panel Thickness (mm) | 3mm galvanized steel checker plate | |
| 18mm water-proof plywood | ||
| Rear Door | Double-Wing Open Door + Galvanized Steel Door Frame | |
| Sub-frame | Painted Z -Steel | |
| Box Structure | Panels assembled with Fiberglass profile and fiberglass corner | |
| Lights & Switch | LED; Water-proof; 12V/24V Convertible | |
| Drain Pipe | 2 sets | |
| Options | Doors | 3-wings Open Rear Door |
| Side Doors | ||
| Tail Lift System | ||
| Profiles | 1. Checked Aluminum Floor Cover | |
| 2. Small M Channle | ||
| 3. T Changels | ||
| 4. Internial Side Kick Plate-Aluminum | ||
| 5. Cargo Fix System | ||
| Dry Freight Panel Kits and Box •generally there are two common used construction systems for Dry Freight Bodies which need totally different material qualities: 1.Dry Freight Body made out of thinner sandwich panels and mounted by profile systems 2.Direct gluing of GRP to prefabricated framework parts which is afterwards mounted to a body. •the roofs of Dry Freight Bodies are often constructed as „translucent roofs“ with a „translucent“ GRP which is directly glued on an underconstruction for both mentioned upper constructions. | ||
| Core Material : the thickness of the sandwich panels is depending on the size of the Dry Freight Body and on the used core material, typical values are for instance: •Plywood core material: approx. 15 – 20 mm 15 mm for smaller vehicles 20 mm for size up to 12 m in length •PP-Honeycomb core material: approx. 20 – 30 mm •XPS- / PU-foam: approx. 25 – 40 mm thinner for smaller truck bodies thicker for bigger truck bodies | ||
| Two Common Construction System | |
1.Dry Freight Body made out of thinner sandwich panels and mounted by profile systems | 2.Direct gluing of GRP to prefabricated framework parts which is afterwards mounted to a body. |
 |  |
translucent roofs
| |
 |  |
| Mounting Profiles | |
 |  |
