Active Member
|
[China]
Address: NO 8001 JINGSHI EAST ROAD,JINAN CHINA
Contact name:Happle Hoo
GENERAL EAST CO.,LTD |
|
|
8 cbm Concrete Mixer tanker truck with Sinotruk HOWO 6x4 Truck chassis for Construction material
concrete mixer Special concrete transport trucks (in-transit mixers) are made to mix concrete and transport it to the construction site. They can be charged with dry materials and water, with the mixing occurring during transport. They can also be loaded from a "central mix" plant; with this process the material has already been mixed prior to loading. The concrete mixing transport truck maintains the material's liquid state through agitation, or turning of the drum, until delivery. The interior of the drum on a concrete mixing truck is fitted with a spiral blade. In one rotational direction, the concrete is pushed deeper into the drum. This is the direction the drum is rotated while the concrete is being transported to the building site. This is known as "charging" the mixer. When the drum rotates in the other direction, the Archimedes' screw-type arrangement "discharges", or forces the concrete out of the drum. From there it may go onto chutes to guide the viscous concrete directly to the job site. If the truck cannot get close enough to the site to use the chutes, the concrete may be discharged into a concrete pump, connected to a flexible hose, or onto a conveyor belt which can be extended some distance (typically ten or more metres)
| 8 cbm Concrete Mixer tanker truck with Sinotruk HOWO 6x4 Truck chassis for Construction material | ||
| HOWO CONCRETE MIXER TRUCK 8000L SHIPMENT DIMENSION : 9500*2500*3300 CHASSIS:CNHTC HOWO ZZ1257N3647W Engine power: 336HP, Euro II Driving type: 6x4, LHD Transmission:HW15710 10 FORWARD 2 REVERSE Tires: Triangle 11R22.5, 11 units (one spare) Tank volume: 8000L Material: B620JJ Thickness: 4.5mm PUMP&Motor Eaton Gear reducer :Bonfiglioli | ||
| Model | ||
| Engine | Make: SINOTRUK | |
| Engine model: WD615.69, Euro II emission standard | ||
| 4 stroke direct injection diesel engine | ||
| 6 cylinder in-line with water cooling, turbo-charging & intercooling | ||
| Maximum output: 336hp(247Kw) at 2200 rpm according to DIN | ||
| Maximum torque: 1300Nm at 1300~1600 rpm | ||
| Bore: 126mm; Stroke: 130mm; | ||
| Displacement: 9.726L; Compression ratio: 17:1 | ||
| Specific fuel consumption: 198g/kWh; Engine oil filling quantity: 20L | ||
| Cooling system filling quantity (long-term filling): 40L | ||
| Thermostat opening temperature: 80oC | ||
| Twin cylinder air compressor Rigid fan | ||
| Option: thermostat with 71 oC opening begin; visco fan | ||
| Clutch | Single- plate dry coil-spring clutch, diameter 420mm, hydraulically operating with air assistance | |
| Transmission | Transmission, model HW15710, synchromesh, 10 forward and 2 reverse Ratio: 14.28 10.62 7.87 5.88 4.38 3.27 2.43 1.80 1.34 1.00 13.91® 3.18® MAX TORTUE: 1500NM | |
| Propeller Shaft | Double universal joint propeller shaft with gear-shaped coupling flange | |
| Front Axle | Steering axle with double T-cross section | |
| Rear Axles | Pressed axle housing, central single reduction gear with planetary wheel reduction and differential locks between wheels and axles | |
| Ratio:5.73 | ||
| Chassis | Frame: U-profile parallel ladder type with section of 300×80×8 mm, all cold riveted cross members and reinforced frame. | |
| Front suspension: 9 semi-elliptic leaf springs with hydraulic telescopic double-action shock absorbers and stabilizer | ||
| Rear suspension: 12 semi-elliptic leaf springs with bogie spring | ||
| Spare wheel carrier: with one spare wheel | ||
| Fuel tank: with400 L fuel tank with locking fuel cap | ||
| Steering | ZF8098, hydraulic steering with power assistance | |
| Ratio: 20.2-26.2:1 | ||
| Brakes | Service brake: dual circuit compressed air brake | |
| Parking Brake(emergency brake): spring energy, compressed air operating on rear wheels | ||
| Auxiliary brake: engine exhaust brake | ||
| Wheel & Types | Rims: 8.5-20, 10 hole-steel | |
| Tyres 12.00－20 tube | ||
| Driver’s cab | Long cab, all steel forward control, 55o hydraulically tiltable to the front,2-arm windscreen wiper system with 3 speeds, laminate windscreen, with casted-in radio aerial, adjustable driver’s seat and rigid adjustable co-driver’s seat, heating & ventilation system, with stereo radio/cassette recorder, sun visor, and adjustable steering wheel, air horn, single bunk with 4-point support fully floating suspension and shock absorber with transverse stabilizer safety belt air conditioner. | |
| Electrics | Operating voltage:24V, negative grounded; Starter: 24V, 5.4KW | |
| Alternator: 28V, 1500W; Batteries: 2×12, 135Ah | ||
| Cigar-lighter, horn, headlamp, fog light, brake lights, indicators and reverse lamp | ||
| Dimensions in mm | Wheel base | 3625+1350 |
| Front wheel track | 2022 | |
| Rear wheel track | 1830 | |
| Front overhang | 1500 | |
| Rear overhang | 2625 | |
| Approach angle(o) | 9 | |
| Departure angle(o) | 12 | |
| Overall Dimension | 9400×2500×4000(mm) | |
| Weight in kg | Permissible loading capacity | 11000 |
| Dead weight | 13830 | |
| Gross vehicle weight | 24960 | |
| Front axle loading capacity | 7000 | |
| Rear axle loading capacity | 9000×2 | |
| Performance | Maximum driving speed(km/h) | 90 |
| Maximum gradeablility (%) | 32 | |
| Minimum ground clearance(mm) | 314 | |
| Minimum turning circle(m) | 18.3 | |
| Fuel consumption(L/100km) | 32 | |
| Body | Drum Volume | 13500L |
| Agitating Capacity | 8 m3 | |
| Drum Slope | 13.5º | |
| Drum Rotating Speed | 0-16 r/min | |
| Water Tank Volume | 400 liters | |
| Discharged remain ratio | < 0.5% | |
