|
[China]
Trade Verify
Address: Rm.8415, Bldg. A8, No. 808 Hongqiao Road, Xuhui District, Shanghai 200030, Chia
Contact name:Zhang Haibin
Kasugai Shanghai Co., Ltd. |
|
Verified Suppliers
|
|
|
ASTM A182 F316 ASME B16.11 High Pressure Stainless Steel Square
Head Plug
Product Information
| Product Name | ASTM A182 F316 ASME B16.11 High Pressure Stainless Steel Square Head Plug |
| Thread Types | ASME B1.20.1(NPT) |
| Dimensions | ASME B16.11 |
| Size Range | 1/8” to 4” |
| Pressure Class | Class 3000 6000 9000 |
| Standards | ASTM A182 F316 |
Standards & Materials: ASTM A182 F316/F316L
Stainless steel 316/ 316L flanges have enhanced resistance to
pitting corrosion in chloride environments due to the addition of
molybdenum. The letter “L” denotes low carbon content. According to
ASME B16.5 and ASME B16.47, SS 316/ 316L flanges may be made from
forgings of ASTM A182 Grade F316 or F316L, castings of ASTM A351
Grades CF8M or CF3M, and plates of ASTM A240 Grades 316 or 316L.
SS 316/ 316L flanges can be furnished in diverse types such as
welding neck, slip on, blind, socket welding, lap joint, threaded,
and reducing, etc. Flanges of ASME B16.5 may be provided in sizes
1/2″ through 24″ in Class 150, 300, 400, 600, 900, 1500, 2500.
Flanges of ASME B16.47 Series A may be provided in sizes 26″through
60″in Class 150, 300, 400, 600, 900; while flanges of ASME B16.47
Series B may be provided in sizes 26″ through 60 in Class 75, 150,
300, 400, 600, 900
ASTM A182 F316/F316L Chemical Composition (%)
| Grade | C, max | Mn, max | P, max | S, max | Si, max | Ni | Cr | Mo | N, max |
| F316 | 0.08 | 2.00 | 0.045 | 0.030 | 1.00 | 10.0~14.0 | 16.0~18.0 | 2.00~3.00 | 0.10 |
| F316L | 0.03 | 2.00 | 0.045 | 0.030 | 1.00 | 10.0~15.0 | 16.0~18.0 | 2.00~3.00 | 0.10 |
ASTM A182 F316/F316L Mechanical Properties
| Grade | Tensile Strength, min (MPa) | Yield Strength, min (MPa) | Elongation in 2inchs, min (%) | Reduction of Area, min (%) |
| F316 | 515 | 205 | 30 | 50 |
| F316L | 485 | 170 | 30 | 50 |
Dimensions of ASME B16.11 Square Head Plug (mm)
| NPS | Min. Length, A | Min. Square Height, B | Min. Width Flats, C(1) |
| ⅛ | 10 | 6 | 7.15 |
| ¼ | 11 | 6 | 9.55 |
| ⅜ | 13 | 8 | 11.11 |
| ½ | 14 | 10 | 14.29 |
| ¾ | 16 | 11 | 15.88 |
| 1 | 19 | 13 | 20.64 |
| 1¼ | 21 | 14 | 23.81 |
| 1½ | 21 | 16 | 28.58 |
| 2 | 22 | 18 | 53.34 |
| 2½ | 27 | 19 | 38.10 |
| 3 | 28 | 21 | 42.86 |
| 4 | 32 | 25 | 63.50 |
General Note: All dimensions are in millimeters
Notes:
(1) Manufacturer’s applied tolerance shall ensure dimensions will
fit U.S. Customary tooling.
