DONGGUAN YUYANG INSTRUMENT CO., LTD |
Verified Suppliers
|
|
Product information:
This sharp point tester is used to check whether the Children's Products like the toys have the sharp point which may hurt the children who are under 36 months.
The test equipment confirms to the standards of ASTM F963 and EN-71 as well as ST2002.
Technical parameters:
Material | Stainless steel |
Indicator | lamp light |
Power | cells |
Weight | 1 pound |
Test | sharpness of point |
Standard | EN71-1 Clause 8.12 |
The working principle:
To make sure whether the testing point of the samples with the force of 1 pound can be inserted into the sharp pointer tester to the depth required. If the device is with a indicator light, the testing sample is proved to be with sharp point.
The instrument consist:
Item | Qauntity |
Main engine | 1 |
Red bulb | 1 |
Weight (1 pound) | 1 |
Package | 1 |
A main engine
A special LED (small red bulb)
A weight : 1 pound
Package: Wooden box
Sharp Point Tester Instructions:
1. Place the sharp cusp tester on the accessible cusp and check
that the sharp point being tested can be inserted into the sharp
tester to the specified depth. The test tip is inserted into the
measuring slot and an external force of 1 lb is applied to make the
indicator light, and the cusp is determined to be a sharp cusp.
2. Wood thorns in wooden toys are dangerously sharp and sharp, so
they must not exist on toys.
3. The sensor head must be adjusted as required before each
inspection to ensure accurate and sensitive sensing.
4. When adjusting the sharp cusp tester, first loosen the lock ring
and then rotate the lock ring to advance the indicator device a
sufficient distance to expose the calibration reference scale on
the circle. Rotate the measurement cover clockwise until the
indicator light flashes. Rotate the measuring cap counterclockwise
until the appropriate micrometer mark matches the calibration
scale, then turn the locking ring until the locking ring is against
the measuring cap to secure the test cover.