0~25mm High Frequency Wire Testing Equipment , Cable Spark Testing Machine 0-15kv

Specifications:

Test Voltage:1.0~15.0KV. Cable Diameter: 0~25mm. Output Frequency: 2.5-3.5KHz normal. Fast recovery time after fault (0.1s)

The Sine Wave Spark Tester is a fast and reliable instrument used in distinguish wire faults and detecting bare wires. Its high-speed fault detection feature gives you prompt information without worsening the condition of the wire after the test.

The use of high frequency (3KHz) enables a traditional commercial power frequency bead chain electrode to be shortened to 120mm HS015E Model.

The Sine Wave Spark Tester is quality-assured to meet your needs.

Basic Function:

1.Fast recovery time after fault (0.1 second).

2.Occupies short space in line and with improvement factor of 50 compared to

3.traditional CT power frequency electrode.

4.Voltage Display: 0.0~15.0KV digit, 14.2mm LED display, Accuracy +/- 1% of reading

5.Output Control: Front Panel Reset in Manual Mode. Closure time is selectable

6.0.2s/2s/5s in main board by jumper JP, Form C relay contacts (250VAC/5A) for all

7.wire faults detected.

8.Limits the fault current without damaging the test equipment.

9.Short exposure time to corona does not degrade nor damage good insulation.

10.Distinguishes all wire faults and detects bare wire.

11.Safety Switch interlock.

Basic Specification: