ISO 9239-1 ASTM E648 Fire Tester Critical Radiant Flux with a
Radiant Heat Energy Source
Description:
FLOORING RADIANT PANEL TEST (CRITICAL RADIANT FLUX), ASTM E 648,
NFPA 253, FED. STD. NO. 372, NBSIR 75-950: The Floor Radiant Panel
apparatus involves a horizontally mounted floor covering test
sample which receives radiant energy from a gas-air fueled radiant
panel mounted above one end of the sample and inclined at an angle
of 30o. The radiant panel generates a radiant flux profile along
the length of the sample ranging from a maximum of 1.1 W/cm2
immediately under the panel to approximately 0.1 W/cm2 at the end
of the test sample. A gas fired pilot burner is used to initiate
the ignition in the sample. The distance the flooring system burns
to extinguishment is converted to watts per square centimeter
(W/cm2) and is reported as critical radiant flux (CRF). This is the
minimum radiant energy a fire needs to sustain flame propagation in
the flooring system. In this test, a higher number indicates a more
flame-resistant system; i.e., 0.45 W/cm2 is better than 0.22 W/
cm2.
Standard:
GB / T11785 "flooring combustion performance measurement - a
radiant heat source”
ISO9239-1:2002 “flooring combustion performance Part 1-the
combustion performance is determined with radiant heat resource”
ASTM E648:Standard Test Method for Critical Radiant Flux of
Floor-covering Systems Using a Radiant Heat
ASTM E970:Standard Test Method for Critical Radiant Flux of Exposed
Attic Floor Insulation Using a Radiant Heat Energy Source
NFPA 253:Standard Test Method for Critical Radiant Flux of Floor
Covering Systems Using a Radiant Heat Energy Source
Parameter:
1. Power supply:AC 220V,50HZ;
2. Total power:2KW;
3. Timer: timing accuracy < 1s/h;
4. Heat flux measurement range: (0-15) Kw / m2;
5. Heat flux meter accuracy: ± 0.2Kw / m2;
6. Heat flux meter accuracy: <± 3%;
7. Thermal radiation temperature measurement range: 400-600 ℃,
accuracy ± 0.5 ℃;
8. Blackbody temperature error: ± 5 ℃;
9. Exhaust speed: (2.5 ± 0.2) m / s;
10. Exhaust capacity: (39-85) m3 / min;
11. Porous refractory radiant panel size: 300mm × 450mm, about 900
℃ high temperature capability;
12. Thermocouple: K diameter stainless steel sheathed thermocouple
of 3.2mm;
13. Heat flux distribution requirements: at 200mm : (9.1 ± 0.4) KW
/ m2;
at 400mm : (5.0 ± 0.4) KW / m2;
at 600mm : (2.4 ± 0.2) KW / m2;
14. Combustion gases: propane (Customer);
15. Combustion gas flow rate: (0.026 ± 0.002) L / S;
16. Combustion burner: outer diameter ¢ 10mm inner diameter ¢ 6mm,
burner tube hit 35 ¢ 0.7mm hole;
17. Flame height: 60 ~ 120mm adjustable;
18. Ignition system: high-voltage electronic ignition;
19. Powerful exhaust system: This machine is equipped with a
powerful exhaust fan, when the test is completed, the system will
start the exhaust fan exhaust outside.
Specification:
1. The apparatus is made of combustion chamber and control box;
2. Combustion chamber size: L1420 * W1200 * H2300 (mm);
3. Outline dimension:L2530*W1270*H2700mm(including electric
cabinet);
4. Control box / combustion chamber material: high quality (t =
1.2mm) 304 is stainless steel, CNC machining, circular nice shape;
5. Blowtorch: made by our company, 304 stainless steel material, in
full compliance with GB / T11785 standards;
6. Other mechanical parts are made of 304 stainless steel or A3
material thicker plating, anti-corrosion and rust.
Anemometer Optical Filter