Electronic Hot And Cold Temperature Test Chamber , Thermal Shock Test Chamber CE Approved

Electronic Hot and Cold Temperature Thermal Shock Environmental Test Chamber

Description:

Electronic Hot and Cold Temperature Shock Simulate Test Machine is divided into high temperature area, low temperature area and test area three parts, each area is a unique insulation structure, so doing hot and cold impact test. High-temperature impact test or low-temperature impact test, the maximum time is up to 9999 minutes, the most cycle time is up to 9999 times. The machine can be automatically or manually cycle the impact or selectively set the two areas or three areas to impact of hot and cold. It used binary cooling system that is very effectiveness for cooling, the cooling system is divided into the air-cooled and water-cooled. It also can be connected with a computer, but the record instrument is only for optional purchase. Color LCD touch-control operation interface with Chinese and English, easy to operate.

Specifications:

Notes:

1. If the high-temp exposure range lower limit + 60°C is required or the low temp exposure range lower limit -60°C, please select the “ambient-temperature exposure” option

2. If the temp fluctuation need to below ±1.8°C please select the “Low temp fluctuation package”

3. Temperature heat-up/pull down time are applicable only during independent chamber operation

4. If the automatically operated sliding door required, please select the “Automatically door package”

5. Air-cooled condenser / Water-cooled condenser both available

6. Apply on water-cooled condenser only

Safety Devices of Hot and Cold Temperature Shock Simulate Test Machine:

1. Hot chamber overheat protection switch

2. Cold chamber overheat protection switch

3. Air circulator overload alarm

4. Refrigerator high/low pressure protector

5. Compressor temperature switch

6. Air pressure switch

7. Fuse

8. Water suspension relay ( water-cooled specification only)

9. Compressor circuit breaker

10. Heater circuit breaker

11. Test area overheat/overcool protector

12. Air purge valve

Control

(Color LCD interactive touch-screen system)

Operation and settings simplified by the use of a touch-screen LCD display (instructions displayed on-screen). At-aglance confirmation of test patterns, test area temperatures, temperature cycles, and trend graph displays.