PLC Control Box Anti Igniting Test Machine For Mattress And Sofa

Anti Igniting Test Machine for Mattress and Sofa

Environmentally friendly Anti Igniting Test Machine for Mattress and Sofa

Anti Igniting Test Machine for Mattress and Sofa Products:

The device is an analog cigarettes and matches as flame ignition source for resistance to ignition of upholstered furniture conduct test methods and evaluation
This section applies to public places with mattresses, sofas and other upholstered furniture resistance to ignition test and evaluation, furniture Soft package resistance to ignition.

Anti Igniting Test Machine for Mattress and Sofa Model:

FTech-FTPC 8

Anti Igniting Test Machine for Mattress and Sofa Standard:

IMO FTPC PART 8

Anti Igniting Test Machine for Mattress and Sofa Features:

Part of the test and the sample box seat
1.The combustion box by the length 3000mm, width 3000mm, height 2700mm;
2.There is fire resistant cabinet Caigangyanmian plate made;
3.The side of the box and opened a vent with fan; external exhaust pipes;
4.Opened a sealed box side windows; beautiful, easy to observe the experiment outside;
5. Increase the door, easy access to mattress and sofa;
6. The box is equipped with explosion-proof lamps provide lighting inside;
7. The specimen bearing groove is made from stainless steel plate, corrosion-resistant; dimensions of 2200mm X 2000mm X100mm;
8. Bearing grooves may collect water used for fire fighting and combustion residue; and the design of the drain; chamber floor to avoid contamination;
9.Stainless steel frame, for supporting the bearing groove; height 30mm;

Anti Igniting Test Machine for Mattress and Sofa Gas control system

1. Independent gas control cabinet
2. Stainless steel cooling tank and the tube built in is stainless steel to ensure that the gas temperature in the gas pipeline at 20ºC and a more accurate gas flow (optional)
3. Imported gas flowmeter display gas flow rate (42 ± 2) mL/min;
4. Imported needle valve control the gas flow rate accurately.
5. Stainless steel burner Outside diameter: 8mm ±0.1mm Internal diameter:6.5mm±0.1mm Length: 200±5mm
6. The burner angle can be adjusted horizontally and vertically
7. Gas output pressure 2.8kpa;
8. Timer accuracy 1s
9. The test environment temperature is 10.0ºC~30.0ºC. The relative humidity is 15% ~ 80%

Anti Igniting Test Machine for Mattress and Sofa The main performance parameters:

1.Timing range: 0-999S, respectively, display and recording continued burning or smoldering time, fabric cracking time, the specimen is off time,

2.Test distance igniter: 20-80 adjustable, with automatic movement and evacuation ignition mechanism 7. The flow measurement range: 10 ~ 100m1 / min

3.Ignition source system: Stainless steel burner tube, an inner diameter (8 ± 0.1mm) inner diameter (6.5 ± 0.1mm) in length (200 ± 5mm) prepare two sets

4.Hose: Length should be (2.5 ~ 3mm) inside diameter of (7 ± 1mm) and stainless steel pipe connected to the combustion

5. Flow control system: Including a flow meter, trim valve, switch valve and regulator.

6. Flow (45 ± 2) m1 / min need to provide the name of the output pressure of the system for 2.8kpa

7. Filter-tipped cigarette of, or remove the filter tip cigarettes cylinder and interface package, and meet the following requirements:

8. Observation window: A glass large observation window, surrounded by SUS304 stainless steel edging

9. Computer control system (test time, number of trials, extended burn time can be set in the computer and record

having high intelligence, guided menu operation, simple and intuitive features, making test results more accurate.

10. Automatic ignition function (for the high-voltage electronic electrical fire).

11. With PLC way, all high-quality devices, ensure that the system of high quality, high speed operation, with advanced. Imported PLC PID automatic control mode during the test, is the most advanced, safest, most reliable, most convenient control. Automatic detection and control, auto-complete inspection work, friendly display interface, the detection work faster and more accurately. PC using configuration software can automatically generate a temperature curve and the report output data acquisition and print test results.