Active Member
|
[China]
Address: ROOM 1205, 12/F, TAI SANG BANK BUILDING, 130-132 DES VOEUX ROAD，CENTRAL, HONG KONG
Contact name:Jack young
Dongguan HOOHA Electrical Equipment Company Limited |
|
|
Wire Twisting Machine 20 Years Cable Machine Designer , Syria 1250 Cantilever Cable Twist Machine
Application
The machine manly apply to multiple cable of data cable,HDMI wire cable,,power cable, naked copper wire(fine wire),
shielding layer cable, control cable etc.
Configuration
Singles stranding main unit, electric control system,Centre wrapping machine, side-way giving wrap & wire device.
cable twist machine traits
1.computer control pitch,non-tension traction wheel,motion wiring cable passing path,increase the traction wheel diameter to
reduce the wire cable curve.
2.Stranding main unit cantilever arm structure,revolving body with low rotating inertia,high rpm and stable speed.
3.Coiling box move trays left and right along the slide way,pitch stable with stepless adjusting,stranding wire cable ranking neat,
balance tension.
4.Compared with traditional single stranding machine,it has the advantage of avoiding screw rod breaking at high speed.
5.Tray loading and discharging easy with low labour consumption
| Cantilever single cable twist machine | ||||
| Model | 630mm | 800mm | 1000mm | |
| Feed wire shaft size | 400-630mm | 400-630mm | 400-630mm | |
| Take-up shaft size | Outer diameter 630× inner width 475 x Outer width 415 x Outer hole 56mm | Outer diameter 800inner width 600 x Outer width500 x Outer hole 80mm | Outer diameter 1000 x inner width750 x Outer width 630 x Outer hole 100mm | |
| Suitable for wire diameter | 0.6mm-3.0mm(Soft structure) | 1.0mm-3.0mm(Soft structure) | 1.2mm-5.0mm(Soft structure) | |
| Max twisting outer diameter | 15mm | 20mm | 25mm | |
| Lay length | 20mm-200mm | 30mm-300mm | 30mm-350mm | |
| Rotate speed | 1000rpm | 800rpm | 600rpm | |
| Take-up tension | Pneumatic tension freely adjust | |||
| Method of traverse | According to the wire bobbin self speed and moving step-less speed regulation | |||
| Traverse pitch | 2mm-12mm | 3mm-20mm | 3mm-30mm | |
| Stranded wire direction | Direction S and Z freely selected | |||
| Taping method | Center lapping or side lay straight packing | |||
| Upper and lower wire bobbin | Hydraulic lifting | |||
