South Korea Wire Twisting Machine , 1250 P Bow Buncher Machine Siemens Motor

South Korea Wire Twisting Machine , 1250 P Bow Buncher Machine Siemens Motor

3.HOOHA Spare Parts Brands:
Motor: Dongguan Motor , Teco, ABB, Siemens
Inverter : Japan Yaskawa, Siemens, Taiwan Teco
Temperature Control Meter: Japan RKC
Auxiliary Relay: Japan Omron
Ammeter and Voltmeter: Taiwan Risesun
Indicator, Switch and Button: Taiwan TEND
Contactor: Taiwan Shihlin
Line Speed Meter: Taiwan FOTEK/Yangming
Bearing : NSK, SKF


4.Afetr service
1).Delivery dates: 45 days
2).Payment: TT or L/C
3).Packing: Wood packing and PE plastic packing ensure the goods safety on the transportation.
4). Install and training service: 2 professional engineers who has over 5 years overseas install and cable manufacture training experience.
5) after service phone number online

5.Contact information:
Phone: +8613763134250
Http//:www.hoohahk.com
Add:No. Beice District, Humen Town,
Dongguan City, Guangdong Province,China

Subject: 1250 Double Twist Buncher
But machine should be designed to last up to 5,000Kgs.

A. Supply scope and Specification:
1. Line composed of:
1 ) 800 (630) mm pay-off: 800 (630) mm x 10 Head motorized pay-off
2) Collective base
3) Electrical Control Box
4) 1250 mm Double Twist Machine Main body

2. Specification of Main body
1) Final application
Bunching of Bare copper wire, Stranding of Insulated cable
2) Inlet size
Bare Cu. Wire 0.5 - 1 .5 mm dia.
Insulated core cable 1.0 - 8.0 mm dia.


3) Finished size after bunching & Stranding:
- Bare Cu. Wire 7.0 mm dia.
- Insulated core cable 20.0 mm dia.
But this machine should produce bare copper wire stranded as finished product
up to 35 mm sq.

4 ) Lay pitch: 30 - 250 mm, Pitch range: 50 mm to 250 mm at each 10 mm interval
EHI will provide the supplier with data sheet for all pitches
4-2) Pitch changing mechanism: by Electronic pitch changing system
5) Traversing:
40 mm Rolling rod (German) + traversing unit (Tian Xiang) but inside Bearing equipped
with NSK Bearings

6) Line speed
Max. 700 rpm, Speed controlled by Inverter
7) Standing & Bunching Direction:
S or Z direction, Direction by manual switch
8) Bobbin Lift Up and Down: By Oil (Hydraulic) lifter with 5 HP AC motor
9) Take-up bobbin: 1250 mm. As per the attached drawing
Max. weight of take-up bobbin (fully wound): 4,000Kgs

1 0) Motor:
Main body: 50 HP AC Motor (TECO) + 50 HP Inverter(YASKAWA)
1 1 )Length counter: Taiwan TOFEK PM12-04N Sensor, 5 digit, Accuracy +/- 0.3%
12) Supply Power: 380 Volt., 60Hz, 3 Phase
13) Emergency stop for safety:
When door opened. When Lifter is not located in the right positions

1 4) Automatic stop
Cable broken, Cable reached to preset length
1 5) Detecting device for Broken end: to be mounted
Its location: 1 inside + 1 outside
16) Main control panel:
Mitsubishi Touch screen & Mitsubishi PLC


1 7) HDI: Digital display for Rotational speed, Line speed, Length counter, Working hours,
Alarm failure indicator
18) Steel plate for Main frame
18-1) St. plate Grade: to be specified
18-2) St. plate Thickness:
Thickness of Bottom steel plate base: mm T.

Thickness of Wall side: mm T.
The supplier guarantee unacceptably severe Vibration (this severe vibration will effect
directly life-time of machine after long-term use) will not happen.


19) Main Bearing and Cooling system for main bearing:
19-1) Bearing brand: NSK
19-2) Cooling system: Auto. Grease Feeding System (total 2 sets)
20) Cooling system inside DTB: High speed 4 Fans
20-1) Capacity of Fan motor: 1 HP/fan
20-2) Air OUT from DTB: 4 Positions at Top side by 1 HP at each position
20-3) Air IN to DTB: 2 Positions at Back-wall side but no fans
21) Tension control: 20 Kg Powder Clutch (Taiwan)