HOOHA High Precision Smoke Density Tester Speed Touch Screen Control

ZY6015D robot cable bending tester

Scope of application:

The robot cable bending tester conforms to the test requirements of high flexible cable such as TUV, VDE and UL. It can be used to test the bending test of the robot cable, flexible cable, bending flexible cable, drag chain cable, chain bend and high flexible cable. The machine structure is a six-station structure, which is mainly used for the repeated bending test of metal wire materials to detect the performance of metal wire and the defects of the plastic deformation in the repeated bending test.

Meet the standard:

Meet the standards of China robot industry alliance standard and other standard CRIA 0003.2-2016 "industrial robot special cable part 2: test method" standard requirements.

Main features:

Main parts: single chip microcomputer, touch screen display/control;

Parameter setting: machine control parameters;

Test conditions: test speed, test frequency, test Angle, control condition, etc.

Test monitoring: current equipment operation state, such as the actual number and speed of the cable bending, etc.

Unsupervised: the device can automatically determine the flow of the sample by monitoring the loop of the sample, and automatically stop when the circuit is broken.

Special fixture: to adjust the radius of curvature by adjusting the bending curvature roller with different wire lines.

The machine features: using the Kunlun mode LCD+ single chip machine + motor, the transmission parts are all imported from the original products, running smoothly, the torque, high positioning accuracy, long life use, low noise;

The online monitoring points are divided into six groups, each with six pairs of interfaces, which can be monitored by 36 pairs of wires.

Main parameters:

Test station: 6 Station;

Test method: the upper end is fixed and the lower end hoisting weight. The sample is bent with free rotational bending curvature.

Sample diameter: 0.3 ~ 15 mm Ф;

Bending curvature roll axis: Ф 15, 20, 30, 40 Ф, 50 mm Ф replaceable;

Sample speed: 0 ~ 45 times/min can be adjusted (note: the test cycle as consisting of four steps, namely as a back and forth around 180 °);

Bending Angle: + 90 °, from left side (start) to the right (end) is 180 °;

The distance between weight weights and bending points: 50-150mm can be adjusted;

Control mode: touch screen control;

Main body part: 45# high quality steel and aluminum structure;

Power and transmission: motor, raw industrial synchronous belt and synchronous wheel;

Test bending point curvature scroll axis: 45# high quality steel, surface chrome treatment;

The online monitoring points are divided into six groups with six pairs of interfaces for each group, which can meet 36 pairs of wires simultaneously, and the monitoring points are 72 points.

Motor power: 0.75kw;

Source: 220v50/60Hz 10A;

Machine size: W1850*D800*H1700mm (including foot wheel height).

Technical services:

The equipment is guaranteed free for one year, the maintenance project is maintenance for the whole machine.

Free technical consultation, software upgrade and other services.

Provide regular inspection service to deal with abnormal conditions of machines.

Customer service response time is within 24 hours.

The warranty period still provides extensive software and hardware support and services