DONGGUAN YUYANG INSTRUMENT CO.,LTD |
Verified Suppliers
|
|
70KW 30-80KHZ Forging / Fitting High Frequency Induction Heating Equipment device
1. Adopt the latest MOS, IGBT frequency control technology, energy
efficient, high output power
2. With constant current and constant power control function, it
can greatly optimise the heating process of metal, achieve high
efficiency and fast heating, and give full play to the superior
performance of the product.
3. It has the function of setting three time for heating, holding
and cooling, and the heating and holding power can be adjusted
individually, so that the required heating and holding process can
be obtained, and it is suitable for batch and repetitive heating
places.
4. As many as ten kinds of fault state protection and display
including over-current, over-voltage, underwater, lack of phase,
etc., providing higher reliability and durability. Safe and
reliable, the equipment does not have 10,000 volts of high voltage,
safe operation.
5. 100 per cent full load design, can work continuously for 24
hours without interruption. Can be equipped with infrared
temperature measurement, to achieve automatic temperature control,
improve the quality of heating, simplify the workers to explore
work.
Advantages of Induction Heating Equipment
1. Fast heating: the minimum rate of heating is less than 1 second
(rate of heating is available for adjustment and control).
2. Wide coverage of heating: it can be used to heat various metal
parts (replace removable induction coil as per different operating
switches).
3. Easy installation: it can be used once it is connected with
power source, induction coil as well as water supply pipe and
rising pipe; it is small in size and light in weight.
4. Easy operation: you can learn to operate it within several
minutes.
5. Fast start-up: it can be started to perform heating operation on
condition that water and power supply is available.
6. Low power consumption: As compared with conventional vacuum tube
high frequency equipments, it can save the power by approximately
70%. The smaller the size of the work piece is, the lower power
consumption would be.
7. High effectiveness: it has such features as uniform heating (it
is applicable to adjust the spacing of the induction coil to ensure
the appropriate temperature as required by each part of work
piece), fast warming and limited oxic horizon, and can guard
against any waste after annealing.
8. Comprehensive protection: it has such functions as overpressure,
over-current, overheat and water shortage alarm indications as well
as automatic control and protection.
9. Controllable temperature: it is applicable to control the
temperature for heating work pieces as per the preset heating time,
and thereby control the heating temperature at a certain technical
point.
10. Comprehensive full load design: it can work continuously for 24
hours.
11. Small size and light weight: it has a weight of only several
dozens of kilograms, of which, the limited floor space can
effectively save the workshop space.
12. Elimination of high voltage: it requires no step-up transformer
which may produce approximately ten thousand voltage, and thus can
ensure the maximum safety.
Type | YY-70AB |
Work power | Three phase 380V 50Hz |
The range of operating voltage | 340V-430V |
Output power | 70KW |
Fluctuating frequency | 30-80khz |
Output current3 | 400-3200A |
Water temperature protection point | 40C |
The flow rate of cooling water | 0.08-0.16mpa 9L/min |
After-sales Service Provided | Online support |
RFQ