|
[China]
Trade Verify
Address: No.168 Zhen'an West Road Changlian Industry Mansion Xiabian Community Dongguan China
Contact name:Sophia Su
DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD |
|
Verified Suppliers
|
|
|
ISO 5657 Radiant Heat Source Ignitability of Building Products Testing Equipment
Introduction:
The Apparatus has been designed, principally for testing building materials and composites, but it is capable of testing any sample of size 165mm x 165mm and up to a maximum of 70mm thick, and measures the ignition characteristics of exposed surfaces of essentially flat materials and specimens.
Standards:
- ISO 5657
Features:
- The sample orientation is horizontal.
- Instrument fitted with pilot flame with provision for
re-ignition, if flame self-extinguishes.
- Apparatus is equipped with a mechanism to bring the pilot flame
into the correct position above the plane of sample every 4 seconds
(for - intermittent flaming exposure).
- Irradiation levels range between 10 & 50 kW/m2, using a
conical radiant heater.
- Conical furnace is controlled by 3 term temperature controller.
- Temperature indicator and over temperature device, for operator
safety.
- Separate support frame and control unit
- Instrument supplied complete with heat flux meter.
Supply Requirements:
| Voltage | 240V- 50/60 Hz -15A |
| Gas | Propane and Air for the pilot flame |
| Water | For cooling the Flux Meter |
