IEC 61621 Insulating Materials Arc Resistance Testing Equipment for Plastics, Films, Resins

IEC 61621 Insulating Materials Arc Resistance Testing Equipment for Plastics, Films, Resins

Mainly applicable to:

GB/T1411-2002 dry solid insulation materials High voltage, low current arc discharge test.

Compliance with the standard: This tester is designed and manufactured in accordance with GB1411, IPC650, IEC 61621, ASTMD495, and complies with JEC 149, UL 746A and other test methods.

Scope of application:

The arc resistance of insulating materials such as plastics, resin glues and insulating paints used in electric motors, electrical appliances and household electrical appliances, etc. is mainly applicable to solid insulating materials such as: plastics, films, resins, mica, ceramics, glass , insulation oil, insulation paint, cardboard and other media arc resistance test.

Features:

The arc resistance tester is controlled by computer. The test curve can be observed online during the test. Data such as test conditions and test results can be stored automatically and can be accessed, displayed and printed.

Test principle: It is used to detect the arc resistance of solid insulating materials; that is, the material to be tested is exposed to a high-voltage, gradually-increasing current environment until a stable conductive path is formed on the surface of the material. At this time, the material is Arc resistance time.

The main technical requirements:

1. Input voltage: AC 220 V

2, the output voltage: AC 0-20 KV;

3, electrical capacity: 1.5 KVA

4, test methods: intermittent arc, continuous arc

5, test current: 10MA-20MA-30MA-40MA optional

6, test voltage control error: ≤ 1%

7, arc off time error: <5ms

8, the test voltage is continuously adjustable: 0--20 KV

9, current control accuracy: ± 10%

10. Electrode specification: Stainless steel plate electrode 25.4mm*12.7mm*0.15mm

Tungsten steel electrode 56mm*7mm*30mm

Electrode configuration angle 110 degrees

The angle between the electrode and the horizontal plane is 35 degrees

Electrode weight: 50G

11, security measures:

(1) Overpressure protection

(2) Overcurrent protection

(3) Short circuit protection

(4) Security door open protection

(5) Software misoperation protection

12. Overall dimensions: length 800× width 700× height 1350mm

Main configuration:

1, a test host

2, 20,000 volts high voltage generator one

3, automatic microcomputer voltage regulator device set (serial mode)

4, voltage acquisition and current acquisition set of isolated transmission device

5, test electrode: two sets

6, a current release rod (resin type)

7, computer arc resistance measurement and control software

8, a set of computers (Lenovo brand)

9, a brand color inkjet printer

10, a set of program CD

11, a product instruction manual

12, a measurement verification certificate

13, a certificate

14, a set of random tools