Lattice Fire Clay Bricks For Checker In Upper Part Of Hot Stove Regenerator

Lattice Fire Clay Bricks For Checker In Upper Part Of Hot Stove Regenerator
 
 
Wedge shaped High Alumina Bricks for Masonry Blast Furnace And Rotary Kiln Lining
Lattice Brick is a heat transfer medium, mainly used in the hot stove in the upper part of the regenerator, from the heat storage effect. In the process of exchanging cold air lattice fire proof brick plays an extremely important role. When the hot air below 900 ℃, the general use of clay brick; when the wind temperature is higher than 900 ℃, the lattice brick is made of high alumina brick, mullite brick , Silicon wire brick and silica brick.
Lattice Brick used in the prior art of the hot blast stove are usually seven-hole lattice bricks. Due to the small number of vias of the seven-hole lattice bricks, there is a drawback that the heating area is limited, and because of its large hole, there is a drawback that the filling coefficient is small. So that there are many improvements in the prior art. Such as by designing a transverse channel in the lower part of the seven-hole brick, so that the gas can pass through the transverse passage through the clogging part into the channel of the lower hole to avoid failure of the entire passage, thereby solving the problems encountered in the prior art due to the formation of the dome and the homogenate The uneven distribution of air flow caused by vortices causes the overall efficiency of the hot blast stove to decrease.

High Alumina Bricks Features:
1, High refractoriness, can reach 1740~1790℃
2, Good wear resistance and chemical erosion resistance
3, High thermal stability and excellent high temp workability
4, smooth ventilation
 

Application:
Lattice Brick is widely recognized and accepted by the world's steel industry, a heat exchange capacity, heat storage area, smooth ventilation, resistance and many other excellent thermal characteristics of the heat storage body.

Specification:

A1: Manufacturer, sometimes we help our clients to purchase relevant products as a trader.
Q2: What’s the MOQ?
A2. The MOQ is 25 tons.
Q3: Can we visit your factory?
A3: Of course ,welcome at any time,seeing is believing
Q4: What’s your payment terms?
A4: Negotiation
Q5: Is your company accept customization?
A5: Yes. Professional technology teams and engineers all can satisfy you.
Q6: How do you guarantee quality?
A6: For every production processing,we have complete QC system for the chemical composition and Physical properties.After production,all the goods will be tested ,and the quality certificate will be shipped along with goods.
Q7: Does your Jundao (Henan)?New Materials?supply samples?
A7: Yes, we can supply samples if necessary.