Active Member
|
[China]
Address: No.399, Fucheng Avenue, High-tech District,Chengdu,610041,China
Contact name:
Sichuan Zhuoan New Materials Technology Co., Ltd. |
|
|
Non-toxic Acrylic Polymer Cement Waterproof Coating ZOAN800 White Liquid
Technical Parameters
| Item | Technical data |
| Solid contents(%) | ≧65 |
| Dry time (hours) | 3-8 |
| Tensile strength Mpa | ≧1.0 |
| Elongation at break (%) | ≧300 |
| Low temperature flexibilty | -10°C |
| Water impermeability | 0.3 Mpa30 impermeable |
Product descrption
Acrylic coating is formulated by combining high polymer acrylic waterproof emulsion, multiple inorganic materials and addictive agents proportionately. It is for common utility of water-proof purpose.
Product Features
1. Carry out construction directly on many kinds of wet and dry material’s base.
2. The coating has the characteristics of high strength,water resistance,high and low temperature resistance,good aging resistance,It is especially better than general waterproof products in anti UV.
3. High bonding strength,good elongation performance.
4. One component,simple construction,short construction time
5. Non-toxic,odorless,at present,It is a substitute of solvent waterproof coating which is often used.
Product applications
It can be used in the wet or dry surface of masonry,mortar ,concrete ,metal ,timber, asbestos, Cement tile, new and old building’s roofs, basements,tunnels,bridge,pond, reservoir,it can also used as decorative coating for exterior.
Product constructions
(1).Method I
Coating structure:
Construction sequence
Quantity of each layer:0.3kg/m2,0.9kg/m2,0.9kg/m2
Amount Quantity:2.1kg/m2
Thickness(d):≈1mm
(2).Method II
Coating structure:
Construction sequence
Quantity of each layer:0.3kg/m2,0.9kg/m2,0.9kg/m2,0.9kg/m2
Amount Quantity:3.0kg/m2
Thickness(d):≈1.5mm
(2).Method III
Coating structure:
Construction sequence
Quantity of each layer:0.3kg/m2,0.7kg/m2,30-60g/m2,0.7kg/m2,0.9kg/m2
Amount Quantity:2.6kg/m2
Thickness(d):≈1.5mm
Construction operation
Coating the layer with the rolling brush or brush, in accordance with the bottom - lower - non-woven cloth(glass fiber cloth)-middle-upper layer, If the the lower needed to be added cloth,lower layer,non-woven cloth layer and the middle layer construction should be continuous. The intervals between the layers should be based on the dry solid of the previous coating. According to the actual requirements of the project,it can be made three layers or four layers,non-woven cloth(glass fiber cloth)and color can be added or not.
Note
1.The coating is evenly as soon as possible,not partial deposition, each layer must be coated according to the prescribed amount of material, the coating layer can not be too thick or too thin, if the thickness of waterproof layer is not enough, you can add a layer.
2.The protective layer should be done when finishing the waterproof layer so as to avoid the waterproof layer
FAQ
1,What kind of technical support can i get from Sichuan Zhuo’an New
Material Technology Company?
At Sichuan Zhuo’an New Material Technology Company?we still believe
in personally answering the phone. In fact, when you call our
toll-free number, you'll always speak directly to a live person who
is knowledgeable about our products and processes.
2,Are there bromides or formaldehyde in any of Sichuan Zhuo’an New
Material Technology Company?
No.Since their invention,Sichuan Zhuo’an New Material Technology
Company.fire retardant and intumescent products have never been
toxic. While formaldehyde might be considered non-toxic at very low
levels, it remains a known carcinogen. At Sichuan Zhuo’an New
Material Technology Company . we strive to develop water based
products.
3,What types of construction can be fire rated by applying Sichuan
Zhuo’an New Material Technology Company?
Intumescent fireproof paint are used in many types of construction,including new construction, retrofit and defective building construction, and historic restoration/renovation construction. Specifically, our intumescent paint can fire rate interior structural steel, and wood.
Our service
1.High stability from different batches.
2.Top factory support and experiences.
3.High reliable for more than 10 years.
4.Standardized after-sales service.
Pre-Sales Service:
* Prompt reply and professional team to provide good product;
* Sample testing and factory inspection support;
* Every batch of products will be tested and sample will be
retained for each batch.
After-Sales Service:
*Logistics information monitoring and following;
* Product guarantee;
* Documents service.
For more information,pls add: Whatsapp:008615902805982 Skype:008615902805982 Email:zoan@sczoan.com Wechat:15902805982
