How/Where to Use
What Are The Most Common Applications For Zhuoan’s Fireproof
Coating?
The most common applications for Zhuoan’s Fireproof Coating are in
the building industry. Historic architecture,wood cottage,
furniture,lumber, OSB, polywood, wood fire resistant coating top
the list. Hotel, hospital, theater, school ,airport, mall, factory
are also a common usage with steel fire resistant coating.
Can Zhuoan’s Fireproof Coating Be Applied Over Existing Rust
And Corrosion?
With wood Fireproof Coating,the substrate surface must be clean,dry
and free from contamination, such as dust,oil stain,water
stain,etc.With steel Fireproof Coating, only a NACE 3 / SSPC-SP 6
commercial blast cleaning is typically necessary.
Application and Training
What Does The Preparation Process Entail?
Only a NACE 3 / SSPC-SP 6 commercial blast cleaning is typically
necessary. There is no need to blast to NACE 1 or 2 since slight
oxidation on the surface allows for the best chemical reaction.
Can The Speed Of Reaction Be Slowed Down To Increase Working Time
Before It Is Cured?
There are various ways to decrease reaction time, but they are
specific to the material being coated and environmental factors. We
will advise you on this during the consultation.
What Thickness Is Recommended?
For wood Fireproof Coating,11.81mils; for steel Fireproof Coating,
118.11~1968.5mils, specific to the material being coated and fire
resistant standard.
Do I Need Special Equipment In Order To Apply
Zhuoan’s Fireproof Coatings?
Zhuoan’s fireproof coating applied using a plural (2K) spray gun or
brush or roller. For spray model, the coating uses specific ratio,
and sprays on using standard plural spray equipment that mixes at
the nozzle of the spray gun. The process requires no heating
equipment or other apparatus besides the plural spray gun.
What Does The Certification Process Entail?
Training is at our facility or yours. We teach you how to use it,
the application process, and how to recognize proper effect.
Experienced painters generally pick up the technique and understand
the minor differences in a few minutes. We recommend two days of
training to allow ample time to cover maintenance of the equipment,
trouble shooting, and to understand the technology.
Who Can Apply Zhuoan’s Fireproof Coatings?
Zhuoan’s Fireproof Coatings can be applied by either:
• An Zhuoan’s Fireproof Coatings certified contractor
• Product manufacturers who have been trained by Zhuoan
If Overspray Happens On Adjacent Surfaces Can It Be Easily Removed?
Zhuoan’s Fireproof Coatings can only be removed by sandblast or
grit media. Our training team will educate your staff on the
process to minimize overspray.
Purchasing Zhuoan’s Fireproof Coatings
There may be an Zhuoan’s Fireproof Coatings distributor near you.
If you are unable to find a distributor or certified applicator
near you, please contact us so that we can arrange direct shipment
to you.
How Do I Buy Fireproof Coatings?
Zhuoan’s Fireproof Coatings can be purchased through an Zhuoan
distributor or by contacting us directly.
