Dellok Yonghui Radiating Pipe Manufacturing Co.,Ltd. |
Verified Suppliers
|
|
OD25.4mm I Type Threaded A192 SMLS Carbon Seamless Pipe
General specifications of l Type fin tubes |
Tube OD: 12mm Min ~ 50.8mm max. Tube Length: 18,000mm max. Fin Height: 20 mm max. Fin Thickness: generally 0.4mm ~0.6mm Fin Pitch: 2.1 mm (12FPI) min. |
General Crimped I Type production capacity |
Finning Facility: 2 finning machines; Daily capacity up to 2000 meters; |
ASTM A179 / A179M : Seamless Cold-Drawn Low-Carbon Steel
Heat-Exchanger and Condenser Tubes
ASTM A192 / A192M : Seamless Carbon Steel Boiler Tubes for
High-Pressure Service
ASTM A210 / A210M : Seamless Medium-Carbon Steel Boiler and
Superheater Tubes
Introduction:
Crimped Fins are spirally wrapped onto the base tube, without
welding, but spot welded. Non-ferrous tubes and fins on either root
soldered or completely tinned. Both bare ends of Crimped fin tubes
shall be Hot Dip Galvanzied on surface, it will be delivered when
tube ends are square cut, free burrs, internally dried and air
blown clean, externally coated with varnish at both ends. The
desiccants are put into each package for continental transportation
as well. All the crimped fin is assured by hydrostatic or pneumatic
tests, eddy current tests and tensile tests in order to verify the
mechanical bonding between inner and outer tubes.
It has many uses in Climatic industry, Cooling, Heating, Drying
Specifications:
Crimped I type finned ube is combined with two different materials.
|
S/R | Descriptions of Crimped I Type Fin Tube | Popular specifications we make |
1 | Tube OD | 5/8'' to 3'' (15.8 mm to 76.2 mm) |
2 | Fin Height | 1/4'' to 3/4'' or 6.4 mm to 20 mm. |
3 | Fin Pitch | 3FPI to 11FPI or 118 FPM to 433 FPM. |
Competitive Advantage:
Our Service:
1. Inquiry-Professional quotation, or send inquiry item more
details, we start contact more details
2. Confirm the price, lead time, payment term etc
3. Our sales send the Proforma Invoice with our seal, or you order
online to us
4. Customer make the payment for deposit and send us Bank receipt
5. Initial Production Stage-Inform the clients that we have got the
payment, and will make the samples according to your request, send
you photos or samples to get your approval. After approval, we
inform that we will arrange the production & inform the
estimated time
6. Middle Production-send photos to show the production line which
you can see you products. Confirm the estimated delivery time
again.
7. End Production-Mass production products photos and samples will
send to you for approval. You can also arrange the third party
inspection
8. Clients make payment for balance and ship goods, inform the
tracking number and check the status for clients
9. Order can be say "finish" when you receive the goods and satisfy
with them
10. Feedback to our about Quality, Service, Market Feedback &
Suggestion. And we can do better