Active Member
|
[China]
Address: No.808, Haitong Road, Wenzhou Economical and Technological Development zone, Zhejiang, China
Contact name:Bryan
Wenzhou jhenten machinery co.,ltd |
|
|
Stainless Steel Top entry Bag Filter Housing With ASME U
Stamp
Feature
Top Entry Bag Filter Housing for some coarse filtration and pre-filteration process
304 and 316 l stainless steel are available, good corrosion resistance, can meet the requirements of various fields.
The design of side entry first and then top entry into the filter bag does not cause turbulence and not reduce pressure because of the stabled pressure. Also this structure effectively protects the filter bag
Detail Description
Top entry Bag Filter Housing effectively removes dirt, pipe scale
anf other contaminants from process liquids such as water,
beverage, chemical and petroleum products. Bag filter can be used
with the standard #1 #2 #3 #4 size bags or the standard perforated
basket as a strainer. Mesh lined baskets are also available as an
optional feature effective filtering area is large, achieving more
efficient filtering result; It is more convenient and swift to
change the filter bag, thus to lower operating cost; The adjustable
height makes the filter applicable to different occasions.
Application
Food and beverage,
Wine industry and meet sanitary grade
Petrochemical. chemical industry
BIopgarmaceutical industry/ envrioment
Printing, furniture industry
Operating Conditions |
| ||
Max operating pressure | 0.6MPa,1.0MPa | ||
Max operating temperture | 150℃ | ||
Material | |||
Shell | 304,316L | ||
Eyebolt | 304 | ||
Stabilizer blade | 304 | ||
O-ring | EPDM, PTFE, Viton, Silicone | ||
|
| ||
Connection | |||
Shell connection | Flange | ||
N1,N2 In-outlet | Flange, Tri-clamp, Thread | ||
N3 Pressure Gauge | M14×1.5 Female thread | ||
N4Vent Valve (option) | 1/4” Male thread | ||
Surface Finish | |||
| |||
Finish type | Mechanical/ Electrolytical polishing | ||
Polishing precision | Inner surface Ra≤0.6μm , , | ||
Dimension Parameters | Cover |
| |
| 1# | 2# |
|
A:Total height | 790 | 1110 |
|
B:The distance from inlet to center | 275 |
| |
C:Shell diameter | Φ204 | Φ204 |
|
D1:The height from inlet to ground | 620 | 940 |
|
D2:The height from outlet to ground | 200 |
| |
N1,N2 In-outlet size | 1.5” or 2” |
| |
E:Stabilizer blade | 550 | 700 |
|
Max flow, m3/h | 20 | 40 |
|
The above-mentioned data is the standard, it can customize according | |||
Selection Table |
|
|
|
| |||||
| ［Qty. of Bag Filter］ | ［Model of Bag Filter］ | ［Shell Material］ | ［In-outlet connection］ | ［O-ring］ | ||||
JTGDD | 1P | 2S | 4 | F | E | ||||
| 1P=1pc | 1S=1#Bag:Φ180 x 430 | 4= 304 | F= Flange | E=EPDM | ||||
|
| 2S=2# Bag:Φ180x 810 | 6= 316L | K= Tri-clamp | P=PTFE | ||||
|
| 3S=3# Bag:Φ105 x 230 |
| L= Thread | V=Viton | ||||
|
| 4S=4# Bag:Φ105x 380 |
|
| S=Silicone | ||||
