Active Member
|
[China]
Address: No. 28, Science Avenue, Shoushu modern industrial park, Hefei Airport
Contact name:Louis
Anhui Zhongdian Environmental Protection Material Co., Ltd. |
|
|
Character
1. Continues operating temperature is 160 degree c, surge temperature is 190 degree C.
2. Excellent hydrolysis resistance and acid and alkali resistance,the range of PH value is 1-14.
3. The PPS filter bags can used in the working condition of oxygen content under 16%(the temperature must be control in suitable area for utilization ).
4. The filtration velocity can choose 1-1.5m/min to reduce equipment volume, lower the equipment cost.
Specifications:
Product Show
Application
Filter bag-----Filter bags for air dust collector
Filter Shaker bags/Shaker Bags
Reverse air filter bags/Filter bags for reverse air
Pulse Jet filter bags
Envelope filter bags
Filter bags for special working conditions
Poyester, polypropylene, nylon and PTFE liquid filter bag
fiberglass dust filter bag
Precautions for dust bag installation
1. Old cloth bags of the new process should not be mixed, to avoid
different damage time and affect the normal operation of the dust
removal equipment.
2. Aging of cloth bags. Mainly due to the following reasons, a
cause investigation is needed, corresponding measures are taken and
the dust filter bag is replaced.
1).Due to abnormal high temperature and hardening shrinkage; 2).
Due to contact with the acid, alkali or organic solvent vapor
reaction; 3).React with moisture.
3. The filter cloth should not be hung too tightly or too tightly.
It is easy to accumulate dust if it is too loose.
4.Replace the cloth bag, blow it with compressed air first, and
then check if there are any holes. After the holes are repaired,
leave them for replacement. As dust
Rinse the cloth bag, rinse it with water, and leave it for
replacement after drying.
5.Blockage of dust bag. When the bag is clogged, the resistance
increases, which can be expressed by the reading of the
differential pressure gauge. Cloth Closure
plugs are the main cause of wear, perforation, and shedding of
bags. The cause of the clogging of the dust bag is checked and
repaired as follows.
1).Temporarily strengthen the dust removal to solve the clogging of
the bag; 2).Replace the bag partially or completely; 3).Adjust the
installation and operating conditions.
FAQ
| Q1. How about your delivery time? |
A1: Generally, it will take 7-30 days after receiving your advance payment. The specific delivery time depends on the items , transportation ways and the quantity of your order.
| Q2. Can you produce according to the samples? |
A2: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
| Q3. Is it convenient to install and operate the equipment? |
A3: Convenient, we will take a one-to-one service for customers, for each customer tailored for your product equipment and a complete set of solutions.
| Q4. What is your terms of payment? |
A4: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.
| Q5. Can it really meet the environmental requirements? |
A5: Ensure that customers meet the environmental standards, the environmental situation of the current 10 mg high emission standards.
| Q6. What if the equipment is broken? |
A6: If any problem occurs during the warranty period, we will try our best to solve it and achieve customer satisfaction.After the warranty period of equipment supporting wearing parts to provide 10% discount policy, and to ensure that customers in the use of no worries.
