Automatic Linear 2 Row Flowmeter Filling Machine For Disinfectant Fluid

Huituo Automatic Linear 2-Row Flowmeter Filling Machine Filler For Disinfectant Fluid 

1. Adopting the principle of electromagnetic flowmeter filling, the touch screen intelligently adjusts the capacity (the touch screen intelligently adjusts the capacity, the operation is convenient, the precision is high, and the production memory function is provided).

2. Equipped with sensors to detect bottle in and out, which can automatically identify the position of the bottle mouth. It will automatically stop and alarm when there is crooked bottle and spilled bottle. It will not fill without bottle. It can identify such situations as liquid level abnormal, misuse and automatically stop and alarm.

3. N groups of anti-drip servo tracking filling heads (tracking filling, bottle type does not need to stay during the conveying process, the filling head system follows the bottle type for tracking filling to increase productivity).

4. Equipped with the bottle conveying barrier to ensure the same distance between the bottle and the bottle. The conveyor chain plate is a “double-transfer chain” to meet the filling work of various bottle types.

5. Each valve body connection adopts a quick interface (easy to disassemble and assemble, no special tools are required).

6. The liquid level of the liquid storage tank adopts probe type/guided wave radar (selected according to customer's material characteristics) to continuously and automatically feed in the set liquid level section; the liquid storage tank is additionally set with high and low level alarm and interlocking device to prevent overflow, and can be linked with the material transfer pump, the pump starts automatically when the liquid level is low, and the pump stops automatically when the liquid level is high.

7. The operation interface can realize the functions of “automatic cycle cleaning, automatic fault inquiry, and real-time fault display”.

8. The filling equipment can adjust the filling amount under the condition that the equipment is running (non-stop state), so that the production efficiency of the whole line is not affected.

9. All safety protection door panels choose SUS 304 material frame.

10. Cylindrical titanium alloy storage tank, equipped with a cleaning ball inside, can be cleaned 360 degrees without dead angle.

11. The system has a rich interface. In addition to the commonly used serial communication interface, an industrial Ethernet interface and a memory card interface are reserved, which can be easily connected to the customer's management network and can record and save production data.

There are mass flowmeters and electromagnetic flowmeters available. For the dishwashing liquid and laundry detergent, it is conductive and electromagnetic flowmeters would be suitable. If the filling material is not conductive, choose mass flowmeters.

1. The measurement accuracy is not affected by changes in fluid density, viscosity, temperature, pressure and conductivity. The sensor induced voltage signal has a linear relationship with the average flow velocity, so the measurement accuracy is high.

2. The range of the electromagnetic flowmeter is wide (maximum flow / minimum flow).

3. In addition to measuring the volume flow of general conductive liquids, electromagnetic flowmeters can also be used to measure strong corrosive liquids such as strong acids and alkalis, mud, pulp and pulp.

4. Two-way measurement system, which can measure forward flow and reverse flow.

5. Electromagnetic flowmeter has reliable performance, high precision, low power consumption, stable zero point and convenient parameter setting. Click on the Chinese display LCD to display cumulative flow, instantaneous flow, flow rate, flow percentage, and more.

The tank is composed of the material box, the feeding pipe, the cleaning pipe, cleaning ball, the liquid level detecting component, the pressurized air hole and the mechanical safety valve. The combination of the action of the pneumatic seat valve and the pneumatic butterfly valve on the feed pipe switches the movement direction of the fluid to realize the conversion between the feed of the tank and the CIP cleaning.

The liquid level sensing element uses a guided wave radar with continuous level detection(the level sensor will be chosen based on the filling material). The feeding of the tank is carried out according to the liquid level detection feedback signal. When the liquid level is at the set low level, the butterfly valve is opened and the feeding is started. When the high level is set, the butterfly valve closes and the feed is stopped. The pressure tank is mechanically protected by a safety valve. When the internal pressure of the tank is too high, the safety valve opens and relieves pressure.

The real-time pressure of the tank is detected by the pressure sensor, and the pressure is applied through the proportional control valve. The real-time pressure is fed back to the operation screen of the filling machine, and the pressure can be adjusted on the operation screen.

The filling nozzle design will be based on the speed requirement and filling material physicochemical characteristics. When changing different products for production, the parameters can be adjusted on the touch screen without manual switching.

Huituo linear flowmeter filling machine chooses Italian imported brand conveying pipe, which conforms to food grade, smooth EPDM rubber, abrasion resistance, ozone resistance and aging resistance, and is sterilized at 110 degrees for 30 minutes.

The servo motor drives the submerged filling mode of the filling nozzle. It runs smoothly, has low noise, is continuously adjustable, and is equipped with a limit switch. It can switch the dive position according to different recipes, and the operation is more stable.