|
[China]
Trade Verify
Address: 2F 7B Nangang First Industrial Park Songbai Road Xili Town, Nanshan District, Shenzhen City Guangdong China
Contact name:Tina
Shenzhen Qiutian Technology Co., Ltd |
|
Verified Suppliers
|
|
|
24 Port POE Switch Gigabit Managed with 24* 10/100M RJ45 and 2*10/100/1000M RJ45 and 2*100/1000M SFP Fiber Slots
Technical Parameter
| Interface Characteristics | ||
| Fixed Port | 24*10/100Base-TX PoE ports (Data/Power) 2*10/100/1000Base-T uplink RJ45 ports (Data) 2*1000M uplink SFP fiber slot ports (Data)(combo port) 1*Console port (command line ) | |
| Ethernet Port | Port 1-24 support 10/100Base-TX, port 25-26 support 10/100/1000Base-T, auto-sensing, full/half duplex MDI/MDI-X self-adaption. | |
| Twisted Pair Transmission | 10BASE-T: Cat3,4,5 UTP(≤100 meter) 100BASE-TX: Cat5 or later UTP(≤100 meter) 1000BASE-T: Cat5e or later UTP(≤100 meter) | |
| SFP Slot Port | Gigabit SFP optical fiber interface, default matching optical modules (optional order single-mode / multi-mode, single fiber / dual fiber optical module. LC) | |
| Optical Cable/ Distance | Multi mode: 850nm 0 ~ 550M, single mode: 1310nm 0 ~ 40KM, 1550nm 0 ~ 120KM. | |
| Chip Parameter | ||
| Network Protocol | IEEE802.3 10BASE-T, IEEE802.3i 10Base-T, IEEE802.3u 100Base-TX, IEEE802.3ab 1000Base-T IEEE802.3z 1000Base-X IEEE802.3x | |
| Forwarding Mode | Store and Forward(Full Wire Speed) | |
| Switching Capacity | 64Gbps (Non-blocking) | |
Forwarding Rate@64byte | 6.55Mpps | |
| MAC | 16K | |
| Buffer Memory | 4M | |
| Jumbo Frame | 10K | |
| LED Indicator | Power:PWR(green), Data :Link,Link/Act (yellow), PoE: PoE (green), Speed: SPD (green) | |
| PoE & Power Supply | ||
| PoE Port | Port 1 to 24 IEEE802.3af/at @ POE | |
| PoE Management | PoE working status Delay start of power supply PoE output priority configuration Scheduling of PoE operation and time | |
| Power Supply Pin | Default :1/2 (+), 3/6 (-),optional:4/5 (+), 7/8 (-) | |
| Max Power Per Port | 30W; IEEE802.3af/at | |
| Total PWR / Input Voltage | 400W/ (AC100-240V) | |
| Power Consumption | Standby<18W, Full load<380W | |
| Power Supply | Built in power supply, AC100~240V 50-60Hz 5.0A | |
| Physical Parameter | ||
| Operation TEMP / Humidity | -20~+55°C;5%~90% RH Non condensing | |
| Storage TEMP / Humidity | -40~+75°C;5%~95% RH Non condensing | |
| Dimension (L*W*H) | 440*290*44.5mm | |
| Net /Gross Weight | <4.5kg/<5kg | |
| Installation | Desktop,wall mounted,19 inch 1U cabinet installation | |
Product Introduction
Gigabit uplink managed PoE fiber switch has 24*10/100M RJ45 ports and 2*10/100/1000M RJ45 ports and 2*100/1000M SFP fiber slot ports(combo port), Port 1-24 can support IEEE802.3af/at standard PoE power supply, and single port PoE power reaches 30W. The maximum PoE output power is 400W(at-600W). and each port can realize line-speed forwarding.
Product Features
100Mbps access, Gigabit (TP/SFP) combo port uplink
◇ All series supports "10/100M Ethernet port and Gigabit TP/SFP port " combination, which enables users to flexibly build networking to meet the needs of various scenarios.
◇ Support non-blocking wire-speed forwarding.
◇ Support full-duplex based on IEEE802.3x and half-duplex based on Backpressure.
Intelligent PoE power supply function
◇ 24*10/100Base-TX RJ45 ports, meeting the needs of security monitoring, teleconferencing system, wireless coverage, and other scenarios.
◇ IEEE 802.3af/at PoE standard, without damaging non-PoE devices.
◇ Priority system for PoE port, it will supply power to the high priority level port first when the power budget is insufficient and avoid overwork of the device.
◇ PoE network management, realize PoE port power allocation, priority setting, port power status viewing, time scheduling, etc.
Product picture
● All of our package are international standard package
● We will deliver our products as soon as the order confirmed
