Home Companies Wuhan Geehe Optical Communication Co.,ltd

Nickel Plated Metal Fiber Optic Cable Connectors ST/UPC Simplex Single Mode

Wuhan Geehe Optical Communication Co.,ltd
Active Member

Contact Us

[China] country

Address: Optical Valley Industrial Park, Wuhan, China

Contact name:Yu Ying

Inquir Now

Wuhan Geehe Optical Communication Co.,ltd

Nickel Plated Metal Fiber Optic Cable Connectors ST/UPC Simplex Single Mode

Country/Region china
City & Province wuhan hubei
InquireNow

Product Details

 

Nickel Plated Metal Fiber Optics Connector ST/UPC Simplex Single Mode   

 

 

 

Brief Introduction:

 

An Optic fiber Connector terminates the end of an optic fiber cable and enables quicker connection and disconnection. The connectors mechanically couple and align the cores of fibers so that light can pass. Better connectors lose very little light due to reflection or misalignment of the fibers.

 

The ST connector family (straight tip) represents the standard connector type for installations and is frequently used in local networks. A typical feature of the ST connector family is the bayonet connection, also known as the BFOC connector (bayonet FO connector). The standard ST connector for telecommunications, LAN, industry, medical and sensor technology. The ST FO connector family meets the standards: IEC 61754-2 and CECC 86 115-801.

 

Ferrule: this is a thin structure (often cylindrical) that actually holds the glass fiber. It has a hollowed-out center that forms a tight grip on the fiber. Ferrules are usually made from ceramic, metal, or high-quality plastic, and typically will hold one strand of fiber.

 

Connector Body: this is a plastic or metal structure that holds the ferrule and attaches to the jacket and strengthens members of the fiber cable itself.


Coupling Mechanism: this is a part of the connector body that holds the connector in place when it gets attached to another device (a switch, NIC, bulkhead coupler, etc.). It may be a latch clip, a bayonet-style nut, or a similar device.

 

 

 

 

Fiber Optic connectors Features and Advantages:

 

  • High Precision Ceramic Ferrule
  • Simplex or Duplex
  • APC Green Polymer housing with 900μm and 3mm strain relief boot
  • Low Return Loss
  • Low cost
  • Low environmental sensitivity
  • High Precision Polymer housing
  • High Precision Nickel-plated brass housing
  • Low Insertion Loss
  • Ease of installation
  • Reliability
  • Ease of use

 

Application of SC Connector:

 

  • Optical Amplifers 
  • EDFA& Raman Amplifier 
  • Fiber Sensor 
  • Fiber Laser 
  • Test Instrumentations

Technology Specification& Parameters:

 

ParameterUnitIndex
End-Face Type PCUPCAPC
ILdBSM: ≤0.3MM ≤0.1
RepeatabilitydB≤0.1
InterchangeabilitydB≤0.2
RLSMdB≥50≥55≥65
MMdB≥36(Exclusive APC Connector)
Mating Times 1000
Operating Temperature-40~ +80

 

 

Order Information:

 

OFC-X-XX-XX-XX-X-X
 S: Simplex
D: Duplex
FA:FC/APC FC:FC/UPC FP:FC/PCFA:FC/APC FC:FC/UPC FP:FC/PC09:0.9mm 20:2.0mm 30:3.0mm0:G652D 1:G657A 2:50/125 3:62.5/125 4:others0.5:0.5m
1.0:1.5m
10:10.0m
Fiber ModeConnector TypeConnector TypeCable DiameterFiber TypeFiber Length

 

 

More Fibre Optic Connector Types:

 

Geehe Service:

 

 

Hot Products

30M Outdoor Armored Fiber Optic Patch Cord Jumper With Duplex LC Connector 1. Brief Introduction: ...
2.0mm Singlemode SC/UPC Simplex Fiber Optic Patch Cable 100 Meters 1. Fiber Patch Cord Basic ...
Singlemode 9/125 OS2 Fiber Optic Patch Cord E2000 APC - LC APC 1. Fiber Patch Cord Basic Introductio...
Multimode 3.0mm Corning OFNR Duplex Fiber Optic Patch Cable LC to LC 100M 1. Fiber Patch Cables ...
2M Corning SC/SC Simplex 9/125 Single Mode Fiber Patch Cable​ 1. Fiber Patch Cord Basic Introduction...
OM2 2.0MM OD SIMPLEX ST APC – ST APC SINGLEMODE FIBER PATCH CORD 10M 1. Basic Introduction: ST/APC ...