Active Member
|
[China]
Address: Floor 3,Building No.7,Tangtou 3rd Industrial Park,Shiyan Street of BaoAn District,ShenZhen City China
Contact name:Jenny
Shenzhen Optfocus Technology Co., Ltd. |
|
|
Max 96 cores Fiber Optic Enclosures 8 Port Horizontally Glue Seal 7300g - 9600g
Features:
OFS-FTH-503 Fiber Optic Splice Closure Datasheet
Model No. | Size (mm) L×W×H | Core capacity | Cable Ports (max) | Max diameter of cable (mm) | Adapter and holes of Front Panel |
OFS-FTH-503 | 590x320x215 | 240 | 8 | 4×Ø41 | FC adapters:48PCS |
SC adapters:96PCS | |||||
4×Ø26 | ST adapters:96PCS | ||||
LC adapters:96PCS |
Remarks:
2 Main components
No. | Name of components | Quantity | Usage | Remarks | |
1 | Housing | 1 set | Protecting fiber cable splices in whole | Internal diameter: 500x205 (mm) | |
2 | Insert plate | 2 pairs | Fixing the housing | 220x80x35(mm) | |
3 | Fiber optic splice tray (FOST) | Max 10 pcs (bunchy Max 9 pcs (ribbon) | Fixing heat shrinkable protective sleeve and holding fibers | Suitable for: Bunchy:24,36,48,72(cores) Ribbon:6,12,18 (pieces) | |
4 | Fixing bracket | 1 set | Fixing fiber cable and reinforced core |
| |
5 | Foundation | 1 set | Fixing FOST |
| |
6 | Seal fitting | 1 set | Sealing between FOSC cover and FOSC bottom |
| |
7 | Port plug | 8 pieces | Sealing empty ports |
| |
8 | Pressure testing valve | 1 set | After injecting air, it is used for pressure testing and sealing testing | Configuration as per requirement | |
9 | Earthing deriving device | 1 set | Deriving metallic components of fiber cable in FOSC for earthing connection | Configuration as per requirement | |
2.3 Main accessories and special tools
No. | Name of accessories | Quantity | Usage | Remarks |
1 | Heat shrinkable protective sleeve |
| Protecting fiber splices | Configuration as per capacity |
2 | Nylon tie |
| Fixing fiber with protective coat | Configuration as per capacity |
3 | Insulation tape | 1 roll | Enlarging diameter of fiber cable for easy fixing |
|
4 | Seal tape | 1 roll | Enlarging diameter of fiber cable which fits in with seal fitting | Configuration as per specification |
5 | Hanging hook | 1 set | For aerial use |
|
6 | Earthing wire | 1 piece | Putting through between earthing devices | To put through as per actual requirement |
7 | Abrasive cloth | 1 piece | Scratching fiber cable |
|
8 | Labeling paper | 1 piece | Labeling fiber |
|
9 | Special wrench | 3 pieces | Fixing bolts, tightening nut of reinforced core |
|
10 | Measuring paper | 1 piece | To measure perimeter, of which the diameter is enlarged with seal tape | To measure perimeter with the corresponding measuring paper |
11 | Buffer tube
| decided by customers | Hitched to fibers and fixed with FOST, managing buffer | Configuration as per requirement |
12 | Desiccant | 1 bag | Put into FOSC before sealing for desiccating air. |
|
13 | Rubber hammer | 1piece | Knocking in or knocking out inset plate |
|
