FA-OA-FPFFPF Metal Fixed Type Optical Fiber Attenuator FC Female to FC Female 1-20dB

FA-OA-FPFFPF Metal Fixed Type Optical Fiber Attenuator FC Female to FC Female 1-20dB

Fiber optical attenuator is a kind of precision fiber optic device which can provide a certain attenuation according to the needs of engineering. It is used in all kinds of optical fiber transmission lines to reduce the light intensity by a predetermined amount. As a kind of optical passive device, it is used to debug the optical power performance, calibrate the optical fiber instrument, and attenuate the optical fiber signal in the optical communication system. Fiber attenuator is made of attenuation fiber mixed with metal ion, which can adjust the optical power to the required level.

Service conditions of optical fiber attenuator: an optical device used when the input optical power of the optical fiber receiver exceeds a certain range or when measuring the sensitivity of the optical fiber receiver.

Working principle of optical attenuator: it changes the proportion of reflected light and transmitted light by adjusting the rotation angle of the fiber attenuator to change the light attenuation.

Type of fiber optical attenuator: fixed type, step-by-step type, continuously change type and so on.

Relevant reference indexes of the fiber optic attenuator: insertion loss, working wavelength, attenuation accuracy, attenuation variation range, step quantity, etc. to measure the working condition and performance of the optical attenuator.

Composition material: optical fiber attenuator is made of glass sheet with evaporated metal film.

Availability of Fiberall Optical Attenuator:

Female to Female ( same interface at two ends)

Female to Male ( same interface at two ends)

Male to Female ( hybrid/conversion type, different interface at two ends)

Connector Type: SC-SC, LC-LC, ST-ST, FC-FC, MU-MU, SC-LC, SC-FC, SC-ST, LC-FC, LC-ST, ST-FC
Attenuation Value Options: 0~30dB
Available Wavelengths:

SM: 1200~1600nm or 1310nm, 1550nm

MM: 850nm, 1300nm
Attenuation Accuracy: +/-0.5 (1 to 10dB), +/-1.0 (11 to 30dB)

Polarization Dependent Loss: ≤0.2dB
Vibration: ≤0.1 dB change between 10Hz to 55Hz
Drop Test: +/-0.2dB after 8 drops (3 axes) from 1.8 meters onto a hard surface

Humidity Range: +/- 0.2 dB change in 10% to 90% relative

Operating Temperature Range: -40 ~ 80˚C