Fiber optic 48 core splice joint closure box mechanical shrinkable
splice joint closure Specification:
24 48 96 144 288 core fiber cable joint box Fiber optic splice
closure is used for connecting and protecting singal core or bunch
cables. It can be placed in underground, aerial, wall-mounting,
pedestal or direct buried, hand hole-mounting and duct-mounting
applications. Our fiber closures can improve the operation of your
network communication system.Closure is suitable for the
applications up to 96 single fibers,which can cover most of the
applications in the long-distance transmission and local fiber
distribution networks, like Fiber To The Home / Fiber To The Curb
...(FTTH/FTTC).
splice joint closure Purpose: aerial, direct-burying, wall-mounting, Pipeline laying way
Components: Seal tape 1PC, Insulation tape 1PC, Nylon tie 4PCS,
optical cable heat shrinkable sleeve 24PCS, mental hook 1SET, seal
fittings 1PC umeral bar 1PC, retaining ring 6PCS
Environmental temperature: -40 to +85
Atmospheric pressure: 70106KPa
Optic property: The spare fiber coiled in the fiber emplacing
device; the fiber connector won't attenuate during the FOSC
installation operation period.
Seal Performance: After the closures are sealed, then pressurized
up to 100KPa±5KPa in water, immersed in 15 minutes, there are no
air bubbles; Or observed for 24 hours, there is no change of air
pressure.
Re-encapsulation Performance: The closures are pressurized up to
100KPa±5KPa in water, immersed in 15 minutes, there are no air
bubbles; Or observed for 24 hours, there is no change of air
pressure after three times of repeat encapsulation
Voltage-resistance strength: Under the effect of 15kv/DC/1min,
non-puncture, and no arc-over.
Insulation resistance: ≥2X104MΩ
Span-life: 30 years.
It is widely used for communication, network system, cabled T.V. of
CATV, the fiber optic cable by network
splice joint closure Uses and properties
It is belonged to open structure airproof tie-in system of machine
pressure.
It is used for the protective connection between two or more
optical cables
Suitable for single core fiber optic cable and ribbon fiber optic
cable
Features:
• The closure adopts heat shrinkable sealing structure.
There is one big oval shaped inlet/outlet port in base.
The big oval shaped port is used for the sealing of uncut
straight-through fiber cable, the small ports are used for
branch fiber cable and drop cable.
• It adopts engineering PC plastic with high-strength to
make the closure has longer life time and excellent
sealing performance.
• The patented sealing structure keep good sealing
performance after re-entry and re-using.
• It is without cable fixing device.
• The bending radius of FOSTs meet the international standard.
• It could save the installation time and improve work efficiently.
Applications
• Suitable for bunchy&ribbon fibers
• Aerial, underground, wall-mounting, hand hole-mounting
pole-mounting and duct-mounting
Information