Shenzhen Jiangfan Communication Equipment Co., Ltd. |
|
1x1 Mechanical Optical Switch 1260~1620(SM),850(MM),for Channel Blocking,Configurable Add/Drop,instrumentation
Description:
The 1x1 fiber optic switch connects optical channels by directing or blocking an incoming optical signal into the output fiber. This is achieved using a patent pending opto-mechanical configuration and activated via an electrical control signal.A latching version preserves the selected optical path after the drive signal has been removed, while the non-latching versions default to either the open or closed state when power is removed. The switch has integrated electrical position sensors.The new material based advanced design significantly reduces moving part position sensitivity, offering unprecedented high stability as well as unmatched low cost.
Application
Features
Specification
Parameters | Specifications | Unit |
Operating Wavelength | 1260~1620(SM),850(MM) | nm |
Insertion Loss | ≤0.6 | dB |
Wavelength Dependent Loss | ≤0.25 | dB |
Polarization Dependent Loss | ≤0.05 | dB |
Temperature Dependent Loss | ≤0.25 | dB |
Return Loss | SM≥55 MM≥35 | dB |
Cross Talk | SM≥50 MM≥35 | dB |
Switch Time | ≤8 | ms |
Repeatability | ≤±0.02 | dB |
Durability | ≥107 | times |
Operating Voltage | 3 or 5 | V |
Switch Type | Non-Latching/Latching | |
Operating Temperature | -20~+70 | ℃ |
Storage Temperature | -40~+85 | ℃ |
Optical Power | ≤500 | mW |
Dimension | 27.0L×12.0W×8.2H | mm |
Pin configurations
Type | Optical Path | Electric Drive | Status Sensor | ||||||
1×1 | Pin 1 | Pin 5 | Pin 6 | Pin 10 | Pin 2-3 | Pin 3-4 | Pin 7-8 | Pin 8-9 | |
Latching | Non‐light | -- | -- | GND | V+ | Close | Open | Open | Close |
P1-P2 | V+ | GND | -- | -- | Open | Close | Close | Open | |
Non-Latching | Non‐light | -- | -- | -- | -- | Close | Open | Open | Close |
P1-P2 | V+ | -- | -- | GND | Open | Close | Close | Open |
Mechanical Dimensions(Unit:mm)
Optical Route