|
[China]
Trade Verify
Address: 1st Floor, A5 Building, NO.3655 SixianRd, Songjiang District, Shanghai201614China
Contact name:Peter Bi
Dawnergy Technologies(Shanghai) Co., Ltd. |
|
Verified Suppliers
|
|
|
OPTICAL FIBER
The optical fiber is made of high pure silica and germanium doped silica. UV curable acrylate material is applied over fiber cladding as optical fiber primary protective coating. The detail data of optical fiber performance are shown in the following table.
UBIF®R10 G.657A1 Fiber
| Category | Description | Specifications | |
| Before cable | After cable | ||
| Optical Specifications | Attenuation @1310 nm | ≤0.35 dB/km | ≤0.40 dB/km |
| Attenuation @1550 nm | ≤0.21 dB/km | ≤0.30 dB/km | |
| Zero Dispersion Wavelength | 1300~1324 nm | ||
| Zero Dispersion Slope | ≤ 0.092 ps/nm2∙km | ||
| Cable Cutoff Wavelength (λcc) | ≤1260 nm | ||
Macro Bending Loss (10 turns; Ф30 mm) @1550 nm (10 turns; Ф30 mm) @1625 nm (1 turns; Ф20 mm) @1550 nm (1 turns; Ф20 mm) @1625 nm |
≤ 0.25 dB ≤ 1.0 dB ≤ 0.75 dB ≤ 1.5 dB | ||
| Mode Field Diameter @1310 nm | (8.6~9.5)±0.4μm | ||
| Dimensional Specifications | Cladding Diameter | 125±1μm | |
| Cladding Non Circularity | ≤1.0% | ||
| Core/Clad Concentricity Error | ≤0.5μm | ||
| Mechanical Specifications | Proof Stress | ≥0.69Gpa | |
UBIF®R7.5 G.657A2 Fiber
| Category | Description | Specifications | |
| Before cable | After cable | ||
| Optical Specifications | Attenuation @1310 nm | ≤0.35 dB/km | ≤0.40 dB/km |
| Attenuation @1550 nm | ≤0.21 dB/km | ≤0.30 dB/km | |
| Zero Dispersion Wavelength | 1300~1324 nm | ||
| Zero Dispersion Slope | ≤0.092 ps/nm2∙km | ||
| Cable Cutoff Wavelength (λcc) | ≤1260 nm | ||
Macro bending Loss (10 turns; Ф30 mm) @1550 nm (10 turns; Ф30 mm) @1625 nm (1 turns; Ф20 mm) @1550 nm (1 turns; Ф20 mm) @1625 nm (1 turns; Ф15 mm) @1550 nm (1 turns; Ф15 mm) @1625 nm |
≤ 0.03 dB ≤ 0.10 dB ≤ 0.10 dB ≤ 0.20 dB ≤ 0.50 dB ≤ 1.00 dB | ||
| Mode Field Diameter @1310 nm | 8.6±0.4μm | ||
| Dimensional Specifications | Cladding Diameter | 125±1μm | |
| Cladding Non Circularity | ≤1.0% | ||
| Core/Clad Concentricity Error | ≤0.5μm | ||
| Mechanical Specifications | Proof Stress | ≥0.69Gpa | |
3 CABLE STRUCTURE
3.1 CABLE TYPE: OFC-2G657A1/A2
3.2 Technical Characteristics
With excellent mechanical and environmental properties
Has good bending performance, easy to install
3.3 Construction:
Dimension and Properties
| Physical | Fiber type | 2 G.657A1, G.657A2 |
| Tight buffer diameter | 0.9±0.05mm | |
| Cable OD | 3.0±0.05mm*6.5*0.05mm | |
| Cable weight | 13.4±2kg/km | |
| Operation temperature range | -15 deg C to + 55 deg C | |
| Installation temperature range | -15 deg C to + 55 deg C | |
| Transport and storage temperature range | -15 deg C to + 55 deg C | |
| Mechanical | Max. tensile load | Short term: 500N; long term: 250N |
| Crush resistance | >1000 N/10cm | |
| impact | >5J | |
| Minimal bending radius | 15mm |
3.4 Color code scheme:
| Tight buffer color | blue | orange |
4. TEST REQUIREMENTS
The cable is in accordance with applicable standard of cable and requirement of customer . The following test items are carried out according to corresponding reference.
| Mode field diameter | IEC 60793-1-45 |
| Mode field Core/clad concentricity | IEC 60793-1-20 |
| Cladding diameter | IEC 60793-1-20 |
| Cladding non-circularity | IEC 60793-1-20 |
| Attenuation coefficient | IEC 60793-1-40 |
| Chromatic dispersion | IEC 60793-1-42 |
| Cable cut-off wavelength | IEC 60793-1-44 |
TEST LIST
4.1 Tension Loading Test
| Test Standard | IEC 60794-1-2 E1 |
| Sample length | No less than 50 meters |
| Load | 600N |
| Duration time | 1 minute |
| Test result | Additional attenuation:≤0.4dB |
| No damage to outer jacket and inner elements |
4.2 Crush/Compression Test
| Test Standard | IEC 60794-1-2 E3 |
| Load | 2200N/10cm |
| Duration time | 1 minute |
| Test Number | 3 |
| Test result | Additional attenuation:≤0.4dB |
| No damage to outer jacket and inner elements |
4.3 Impact Resistance Test
| Test Standard | IEC 60794-1-2 E4 |
| Impact energy | 1J |
| Radius | 12.5mm |
| Impact points | 3 |
| Impact number | 1 |
| Test result | Additional attenuation:≤0.4dB |
| No damage to outer jacket and inner elements |
4.4 Repeated Bending Test
| Test Standard | IEC 60794-1-2 E6 |
| Bending radius | 20 X diameter of cable |
| Cycles | 30 cycle |
| Test result | Additional attenuation:≤0.4dB |
| No damage to outer jacket and inner elements |
5. PACKING AND DRUM
5.1 Cables are packed in carton , coiled on Bakelite & wooden drum. During transportation , right tools should be used to avoid damaging the package and to handle with ease. Cables should be protected from moisture ; kept away from high temperature and fire sparks ; protected from over bending and crushing; protected from mechanical stress and damage.
5.2 The color of cable marking is white. (The printing shall be carried out at interval of 1 meter on the outer sheath of cable) The inner end of cable is then sealed with heat shrinkable end cap to prevent ingress of water and is made available for testing. The outer end of cable is equipped with heat shrinkable end cap. Outer sheath marking legend can be changed according to user’s requests.
5.3 Indoor cable packing
Bakelite & wooden drum
Strong wooden batten protection
