Home Companies Shenzhen Unifiber Technology Co.,Ltd

FSW Full 2X2 Fiber Mechanical Optical Switch 5V Non Latching 1550nm 500mW

Shenzhen Unifiber Technology Co.,Ltd

Contact Us

[China] country

Trade Verify

Address: 2F,Block 2, The Fourth Industry Park, ShuiTian Community,ShiYan,BaoAn Area,ShenZhen,China.

Contact name:Kerry Sun

Inquir Now

Shenzhen Unifiber Technology Co.,Ltd

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

FSW Full 2X2 Fiber Mechanical Optical Switch 5V Non Latching 1550nm 500mW

Country/Region china
City & Province shenzhen guangdong
InquireNow

Product Details

Full 2x2 fiber optic switch connects optical channels by directing or blocking an incoming optical signal into the output fiber. This is achieved using a patent pending opto-mechanical configuration and activated via an electrical control signal. A latching version preserves the selected optical path after the drive signal has been removed, while the non-latching versions default to either the open or closed state when power is removed. The Mechanical Fiber Optical Switch has integrated electrical position sensors. The new material based advanced design significantly reduces moving part position sensitivity, offering unprecedented high stability as well as unmatched low cost

 

FeaturesApplications
Unmatched Low CostOptical Network
Low Insertion lossProtection/Restoration
High Channel IsolationOptical Singnal Routing
High Stability, High ReliabilityConfigurable Optical Add/Drop
Epoxy-free on Optical PathTransmitter and receiver protection
Latching and Non-latchingNetwork Test System

 

Specifications

 

Operating Wavelength

1260~1620nm(SM)

850nm(MM)

Insertion Loss≤1.0dB
Wavelength Dependent Loss≤0.25dBPolarization Dependent Loss≤0.05dB
Temperature Dependent Loss≤0.20dBReturn Loss

SM≥50dB

MM≥30dB

Cross Talk

SM≥55dB

MM≥35dB

Switch Time≤8ms
Repeatability≤±0.02dBDurability≥107 times
Operating Voltage3 or 5VSwitch TypeNon-Latching/Latching
Operating Temperature-20~+70℃Storage Temperature-40~+85℃
Optical Power≤500mWDimension27.0L×12.0W×8.2H mm

 

Pin Configurations

 

TypeOptical RouteElectric DriveState Sensor
F2×2Pin 1Pin5Pin6Pin10Pin 2-3Pin3-4Pin7-8Pin 8-9
LatchingP1-P4,P2-P3----GNDV+CloseOpenOpenClose
P1-P3,P2-P4V+GND----OpenCloseCloseOpen
Non-latchingP1-P4,P2-P3--------CloseOpenOpenClose
P1-P3,P2-P4V+----GNDOpenCloseCloseOpen

 

Hot Products

1/2/4 core G.657A2 Outdoor FTTH Drop Cable GJYXCH is positioned in the center. Two parallel Fiber ...
Indoor/Outdoor SST-Drop with OptiTap cable assemblies provide the simple installation offered by ...
FTTH fiber optic cable is Fiber to Home, which used for linking the equipment and components in the ...
Uni-Tube All Dielectric Aerial Drop cable is Especially designed for Fiber to the Subscriber ...
S type plastic anchor clamp is used to bind self-supporting optical fibers cable supporting wire, to ...
Stainless steel drop wire clamp is a type of wire clamp, which is widely used to support telephone ...