Active Member
|
[China]
Address: Room 2904 Building B2 , Optical valley center garden, Luoyu road, Hongshan district, Wuhan, hubei province, China
Contact name:huahai
Wuhan Huahai Century Laser Co., Ltd. |
|
|
Enclosed Continuous Fiber Laser Welding Machine For Hardware Metal
1. High speed, high precision, more refined appearance
2. The size of solder joints can be adjusted according to the requirements, and the heat affected zone is small which will not cause the deformation of precision products
3. Can weld small and fine geometry, suitable for all sizes of products
4. Density welding does not appear porosity and trachoma, can be directly grinding, polishing processing
1. The fiber continuous laser welding machine uses 500W-2000W
laser, the laser has a long service lifeand the service life can
reach 100,000 hours.
2. The electro-optic conversion efficiency is high, and the energy
of the power shaving is 25%-30% converted into laser, and the fiber
conversion rate is more than 10 times that of the YAG laser.
3. The whole machine has no consumables. YAG pulse welding machine
should replace the xenon lamp and lens regularly.
4. The whole machine has low energy consumption, saves electricity,
high stability, maintenance-free, and low cost of use.
5. The laser welding energy density is high, welding speed is four
times that of YAG pulse.the weld seam is thin,the thermal
deformation is small, and the heat affected zone is narrow and
deep.
6. Optical fiber output, easy to match with automated workbench or
robot to improve production efficiency,and can meet 24 hours of
continuous work.
7. Customizable large workbench and XYZ axis travel.
Device parameters | ||
laser device | Continuous fiber laser | |
The laser wavelength | 1070nm±5nm | |
Average output power | 1000W | |
The minimum spot | 0.1mm | |
fiber length | 5m | |
Rated power | 3.5KW | |
Cold power of cold water mechanism | 1.5P | |
Demand for electricity | 220V±5V 50Hz/40A | |
Range of electric working table | 300×300×500mm | |
External dimensions/net weight | Host computer: 1050*500*900mm | 175kg |
cooling-water machine: 550*550*850mm | 80kg | |
workbench: 1000*700*1550mm | 220kg | |
1. A set of 1000W continuous lasers;
2. One laser fiber;
3. A set of welding heads;
4. One 1.5P chiller;
5. A set of computer welding systems;
6. 500*300*300 electric translation stage set;
7. a set of 3600 four-axis control system;
8. a set of host cabinets.
