Active Member
|
[China]
Address: Room 2904 Building B2 , Optical valley center garden, Luoyu road, Hongshan district, Wuhan, hubei province, China
Contact name:huahai
Wuhan Huahai Century Laser Co., Ltd. |
|
|
150W Mini Portable Laser Spot Welding Machine For Jewelry Eyewear
Welding Repairing
SW series laser spot welder is firstly designed for jewelry ornaments manufacturing, jewelry repairing, rings or bracelets resizing, gold and silver re-tipping, stone setting, eyewear welding or repairing, denture welding, small auto parts welding, etc. Generally, it is especially suitable for tiny target precision welding. It works on gold, platinum, titanium, silver, copper, nickel, aluminum, magnesium, stainless steel, etc.
Features Of Jewelry Laser Spot Welding Machine
● Energy, pulse width, frequency and focus can be adjusted within a
wide range to achieve different welding effects.
● Ceramic reflector used in the laser pump chamber is imported,
which is corrosion resistant, high temperature resistant, high
electrical/optical conversion.
● World-leading automatic light shielding system is employed to
remove harmful lighting on eyes during operation.
● 24-hour continuous operation, with stable operating performance,
● Free of maintenance within 10000 hours.
● Personalized design in compliance with ergonomics principles.
Main Structure & Maintenance
The whole system is composed of:
A. Laser Generator B. Laser Power C. Optical System
D. Control system E. Cooling system
Operation
Step 1) Start the chiller and wait for 1-2 minutes until the water temperature reaches the target value you set. Normally 25 Celsius Degrees.
Step 2) Turn on the air switch behind the welder
Step 3) Twist the key switch to start laser welder
Step 4) Press “OK” button on control panel, the word OPEN turns into CLOSE. Set parameters correctly based on the type of material and the result of test shooting. Sometimes it relies more on operator’s experience.
Step 5) Turn on the LED light and adjust the position of cover gas nozzle before welding so that your work piece can be prevented from quick oxidation. You can also change all parameters by the joystick inside the welding chamber or stop welding immediately by the emergency button.
Step 6) Now you are free to weld.
step 7) When you finish welding, move the dash on CLOSE, press OK button, turn off the key switch, turn off the chiller and cut the total power. Finally, please open the protective cover and clean the dusts in the welding chamber. We strongly suggest you to do this at least once a week.
Technical Parameters
Laser Source: Nd3+:YAG
Wavelength: 1064nm
Pulse frequency: 1~50Hz adjustable
Pulse width: 1.5~20ms adjustable
Single pulse Energy: 60 J
Rated Laser Power: 150W
Max Single Power: 180 W
Cover Gas Channel: 1 line quick connection
Focused Beam Diameter: 0.1~3mm
Expanding Ratio: 3
Focal Length: 100mm
Power Supply: Single phase AC 220V±10%
Peak Power: 6kW when starting/2-4kW when welding
Standby Power: 0.3-0.5kW
Running Environment: Temperature 10℃~32℃, humidity < 85%.
Continuous Working Time: 24 hours
Sample show
