Mini Laser Rust Removal Cleaning to Remove Welding Flow Mark

Introduction

The laser cleaning machine is a new generation of high-tech products for surface cleaning. It’s very easy to install and operate. It could be used with no chemical reagents,no media, dust-free, and anhydrous cleaning, with the advantages of autofocus, fit crank surface cleaning, and high surface cleanliness. The laser cleaning machine can clear the surface resin, oil, dirt, rust, coating, paint, etc.

Photo of the machine:

Application

Keyi LASER provides surface preparation technology that’s both efficient and remarkably versatile for a growing list of industrial applications. Whether the surface is metallic, plastic, ceramic, glass, stone, or concrete, the results speak for themselves.
 

Technical Parameters

Laser Derusting Machines: More Applicable Industries

1) Laser cleaning in the mold industry

Traditional cleaning for moulds includes sandblasting, ultrasonic, and CO2. Super-hot moulds must be cleaned after hours of cooling,which takes so much time.

This will damage the accuracy of moulds,chemical solvents, and noises, which will also cause problems for safety and the environment.

A laser beam can be transferred through optical fiber,so it can clean dead angles and other places that are difficult to clean.

For rubber moulds, a laser beam will not gasify them, so there will not be harmful gas.Laser is already applied in the tire molding industry in European countries.

The anti-sticking films in food moulds need periodic replacement.Laser cleaning is also more suitable than chemical reagents.

2) Laser cleaning in Weapons

Laser cleaning can remove rust and contaminants from weapons with high speed and efficiency. The cleanliness is much higher than that of chemical cleaning, and there is no damage to the body surface.And a compact oxide coating and molten metal layer can be formed on the body surface, which can improve surface strength and corrosion resistance.

3) Laser cleaning in removing old paint in airplanes

Airplanes need to be repainted after a certain time, but old paint must be completely removed before repainting.Traditional mechanical cleaning will damage metal

surface of airplanes,which will bring hidden danger to safe flight. Less cleaning will not damage the surface.

4) Laser cleaning of the outer wall of the building

As there are more and more buildings nowadays, the demand for outer wall cleaning is becoming huge.Laser cleaning offers a more effective solution for any contaminants on stones, metals, and glass in the outer walls than traditional cleaning.

5) Laser cleaning in electronics industry

Lasers are also applied in the electronics industry to remove oxide accurately. Before circuit board welding,the oxide on electronics component pins must be

completely removed to ensure the best conductivity without damaging the pins.Laser cleaning can do this and can clean one pin for one laser pulse.

6) Degree in precision engineering industry

Usually we remove esters and mineral oil through chemical processes in the precision engineering industry,but there will be chemical residue.

Laser beams can completely remove esters and mineral oil without damaging spare parts’ surfaces. This process is done by the blast wave, not mechanical effects.

This is very suitable for cleaning machine parts in the aerospace industry and other precision parts processing.

7) Pipeline laser cleaning in nuclear reactor

High-power laser beams through optical fiber can directly remove radioactive dust to ensure the safety of the staff.