Home Companies E-link China Technology Co., Ltd.

Active Optical Cable Fiber Optic Transceiver Module OM2 Cable Length 1m 10G SFP+ To SFP+

Contact Us

[China]

Trade Verify

Address: 5F, Building D South, Jinshenghui Science Park, No. 3, Dafu Road, Fucheng Street, Guanlan, Longhua District, Shenzhen, China

Contact name:Michael Guo

E-link China Technology Co., Ltd.

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

Active Optical Cable Fiber Optic Transceiver Module OM2 Cable Length 1m 10G SFP+ To SFP+

Country/Region	china
City & Province	shenzhen guangdong

Product Details

OM2 Cable Length 1m 10G SFP+ to SFP+ Active Optical Cable SFP Optical Transceiver

1. Applications

Datacom
10G Ethernet
Other high-throughput data transmission network

2. Features

10Gb/s active optical cable up to 100m MMF
850nm VCSEL and PIN receiver
Single 3.3V power supply
Operating Case Temperature: -5~75℃
Hot pluggable
Low Power Consumption
Light weight
Small Bend Radius
Digital Diagnostic Monitor(DDM)
All-metal Housing for Superior EMI Performance

3. Description

E-link’s LNK-AA18MX-XXX SFP+ Active Optical Cable (AOC) is a 10Gbps solution to 10G Ethernet, and data center. The integrated cable transmits 10Gbps data in each direction over MMF with distance up to 100m. The AOC is SFP+ MSA compliance, low power consumption and lightweight.

4. standard

Compliant with SFF-8431 and SFF-8432
Compliant with SFF-8472 Rev 10.2
Compliant with IEEE 802.3ae 10GBASE-LR and 10GBASE-LW
RoHS Compliant

5. Performance Specifications

5.1. Absolute Maximum Ratings

These values represent the damage threshold of the module. Stress in excess of any of the individual Absolute Maximum Ratings can cause immediate catastrophic damage to the module even if all other parameters are within Recommended Operating Conditions.

Table.1 Absolute maximum ratings

Parameter	Symbol	Min	Max	Units
Storage temperature	Ts	-20	85	℃
Relative Humidity	RH	5	85	%
Supply Voltage	Vc	-0.3	3.6	V
Supply Current	Icc		450	mA

5.2. Recommended Operating Conditions

Table.2 Recommended Operating Conditions

Parameter	Symbol	Min	Typical	Max	Unit
Operating Case Temperature	Standard Tc	0	25	70	°C
Power Supply Voltage	Vcc	3.13	3.3	3.47	V
Power Supply Current	Icc		60	260	mA
Power Dissipation	PD		600	800	mW
Data Rate	DR		10.3125		Gbps
Transmission Distance	TD			100	m

5.3. Transmitter Specification

Table.3 Transmitter Specification (Optical)

Parameter	Symbol	Min.	Typ.	Max.	Unit	Note
Average Output Power	Po	-5		-1	dBm
Disable Power	Poff			-40	dBm
Extinction Ratio	ER	3.5			dB
Output Centre Wavelength	λc	840		860	nm

Table.4 Transmitter Specification (Electrical)

Parameter		Symbol	Min	Typical	Max	Unit
Data Input Swing Differential		VIN	200		700	mV
Input Differential Impedance		ZIN	90	100	110	Ω
Transmit Disable Input	High	VIH	2.0		Vcc+0.3	V
Transmit Disable Input	Low	VIL	0		0.8	V

5.4. Receiver Specification

Table.5 Receiver Specification (Optical)

Parameter	Symbol	Min	Typical	Max	Unit	note
Centre Wavelength	λc	840	850	860	nm
Receiver Sensitivity	Sen			-11	dBm	1
Receiver Overload	Psat	0.5			dBm	1
LOS De-Assert	LOSD			-15	dBm
LOS Assert	LOSA	-30			dBm
LOS Hysteresis		0.5		4	dB
Receiver Reflectance	Rrx			-12	dB

Note :1. Measured at BER 10-12, 10.3Gbps, PRBS2^31-1, NRZ

Table.6 Receiver Specification (Electrical)

Parameter	Symbol	Min	Typical	Max	Unit	note
Data Output Swing Differential	Vout	300		800	mV
Rx-Los Fault	Vlf	2.0		VccHOST	V
Rx-Los Normal	Vln	0		0+0.8	V
Output rise and fall time	Tr, Tf	28			ps

5.5. Diagnostics Specification

Table.7 Diagnostics Specification

Parameter	Range	Unit	Accuracy	Calibration
Temperature	0 to 70	℃	±3℃	Internal / External
Voltage	3.0 to 3.6	V	±3%	Internal / External
Bias Current	0 to 100	mA	±10%	Internal / External
TX Power	-5 to -1	dBm	±3dB	Internal / External
RX Power	-30 to 0	dBm	±3dB	Internal / External