Home Companies E-link China Technology Co., Ltd.

L3 Managed Fiber Optic Switch 48 Port Gigabit SFP / 6 Port Combo Ethernet 80 Watt

Contact Us

[China]

Trade Verify

Address: 5F, Building D South, Jinshenghui Science Park, No. 3, Dafu Road, Fucheng Street, Guanlan, Longhua District, Shenzhen, China

Contact name:Michael Guo

E-link China Technology Co., Ltd.

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

L3 Managed Fiber Optic Switch 48 Port Gigabit SFP / 6 Port Combo Ethernet 80 Watt

Country/Region china
City & Province shenzhen guangdong
Categories PBX

Product Details

L3 Managed 48-Port Gigabit SFP + 6-Port Combo Ethernet + 4-Port 10G SFP+ Fiber Switch

Model: LNK-FS48G6C4X Series

 

 

Overview

 

LNK-FS48G6C4X Series 48-Port SFP Fiber Switch are standard layer 3 non-blocking switch with 48-Port Gigabit SFP, 6-Port Combo Ethernet and 4-Port extensible 10G SFP+, based on high-performance ASIC chip technology, the modular structure design , which have a capability of multilayer switching and wire-speed routing forwarding. Can be deployed in the metropolitan area network, and provides a few last 1 km technology to gather and core data exchange.

 

At the same time, FS48G6C4X Series Switches provide a complete IPv4/IPv6 routing, including tunnel and IP multicast.

 

The user can set all kinds of functions of switch through the Web, SNMP and so on. FS48G6C4X Series Switches support DOS defense, Qos, RSTP, MSTP, VLAN, Port Security, a storm suppression, ACL access control and other functions, which is very suitable for the aggregation application of large-scale network and the core application of medium and small-sized network.

 

 

Technical Indexes

Product TypeL3 Managed 48G SFP+6GE Combo+4x10G SFP Fiber Switch
Fixed port48-Port Gigabit SFP Fiber Port + 6-Port Combo TP + 4-Port SFP+
Backplane bandwidth176Gbps
Packet forwarding rate130.94Mpps
ProcessorRISC 600MHz
Flash memory capacity8MB
The memory capacity128MB
Address table32K
Product characteristics
Spanning tree

Support STP, RSTP, MSTP

Support PVST/PVST+

VLANSupport port-based VLAN
Support MAC based VLAN
Support 802.1Q tag VLAN
Support Super VLAN
Support for Private VLAN
Support GVRP Dynamic VLAN Configuration
Support QinQ and Smart QinQ
Support Voice VLAN
Flow controlBased on a standard IEEE 802.3x flow control
Using IEEE 802.1Qbb priority flow control
Support CAR Function
Broadcast controlRestraining broadcast storm, stop sending so long as reaching a critical point
Multicast controlIGMP Snooping multicast message automatic monitoring
Port bindingEach group of a maximum of 8, while support 32 group
LACP dynamic or static polymerization
Port mirroringSupport based on flow classification mirroring and port mirroring
Stacked

Stacked 16 hard, soft stacking 32

Using clustering techniques, with a unified centralized management of IP address to do address resource saving

Routing managementStatic routing
RIP v1/v2, OSPFv2, BEIGRP (compatible with Cisco EIGRP), BGPv4, ISIS, BGP
Anti virus intelligent routing function
Strategy routingSupport based on IP strategy routing
The proxy functionSupport Proxy ARP, DNS Proxy
Redundancy backupSupport for VRRP, HSRP Hot Standby Router Protocol
Characteristics of DHCPDHCP Server, DHCP Client and support DHCP relay
Function of NATSupport the static or dynamic NAT address translation function
Safety characteristics

Port Security (Port Security) function

Hardware support for IP ACL, MAC ACL, Vlan ACL
Hardware support for port based user IP+MAC+Vlan ID+ user account a variety of factors combined to bind
Support IP Source Guard
Support WEB interface user authentication

User classification management and password protection
Safety control technology
Policy control list

Quality of serviceIEEE 802.1Qau congestion mechanism
Each port 8 send queue mapping 802.1p 8 priority
DRR, WRR, SP and FIFO queue scheduling algorithm
Best-Effort Service
Differentiated Service
Strict Priority
Weighted Round Robin
First come first served
TOS to mark
RTS
Network managementSNMP v1/v2/v3
RMON (1,2,3,9 group)
Telnet
WEB interface
Support for cluster management
Support SSH
Support for PDP (compatible with Cisco CDP.)
To support the fan, temperature, system log, hierarchical alarm
Physical characteristics
Appearance size442mm × 285mm × 44mm
Power characteristicAC 110-240V adaptive, 47-63Hz, 1A/230V, RPS power hot backup
Power80W
Indicator lampPower indicator, indication of system, connecting / transceiver instructions
Environment

Operating Temperature: 0-50 ℃
Storage Temperature: -40-70 ℃

Relative Humidity: 0-90% no condensation

 

Ordering Information

ModelDescription
LNK-FS48G6C4XL3 Managed 48-Port Gigabit SFP + 6-Port Combo Ethernet + 4-Port 10G SFP+ Fiber Switch

 

Application Diagram

 

 

 

 

Hot Products

L3 Managed 48-Port Gigabit SFP + 6-Port Combo Ethernet + 4-Port 10G SFP+ Fiber Switch Model: LNK...
Industrial DIN-Rail 1 Channel Contact Closure over Fiber Converter Model: LNK-GY-K01 Overview The ...
Model:LNK-277 Series Overview LNK-277 Series is an industrial grade RS-232 / RS-422/ RS-485 to fiber ...
Model: LNK-GYT204GP-SFP Series Overview LNK-GYT204GP-SFP Series is 250m Industrial PoE Switch with 4 ...
Model: LNK-GYT208GP-SFP Series Overview LNK-GYT208GP-SFP Series is 250m Industrial PoE Switch with 8 ...
Model: LNK-2401-RS232 Series Overview LNK-2401-RS232 provides 4 port RS232 (RS-232 connector: RJ45), ...