|
[China]
Trade Verify
Address: 5F, Building D South, Jinshenghui Science Park, No. 3, Dafu Road, Fucheng Street, Guanlan, Longhua District, Shenzhen, China
Contact name:Michael Guo
E-link China Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
Overview
The LNK-ET1100P Series product provides Ethernet Extension of 1-CH 10/100Base-TX over Twisted pair cable(400m max.). The products provide high power PoE (30W max Power Sourcing Equipment (PSE)) to the network camera. The products support PoW, hence, no power point is required for the transmitter and the network camera at the transmitter side. The product is good for retrofit of analog system by using the existing cable infrastructure.
Technical Indexes
| Ethernet | |
| Standards | IEEE802.3 10Base-T |
| IEEE802.3u 100Base-TX | |
| IEEE802.3af Power over Ethernet | |
| IEEE802.3at Power over Ethernet | |
| Connector | 1 × RJ45 |
| Cabling | Cat5 or above |
| Maximum Distance | 100m |
| Shielded Twisted Pair | |
| Cabling | Shielded Twisted Pair |
| Connector | 2-pin terminal block |
| Distance | Up to 400m@26AWG |
| Data Rate | |
| Downlink | 90Mbps (Max.) |
| Uplink | 90Mbps (Max.) |
| Technology | Power Line Communication (PLC) |
| Electrical and Mechanical | |
| Input Power | 48~57VDC (Terminal Block) or IEEE802.3at PD (for LNK-ET1100P-R only) |
| Power Consumption | 8W Max. (PoW not in use) |
| 60W Max. (PoW in use) | |
| Protection | |
| Reverse Polarity | Present |
| Power Input Overload | Present |
| LED Indicators | |
| Power | Power Status |
| Ethernet | SPD, LINK/ACT, PoE (Transmitter) |
| Shielded Twisted Pair | LINK (Transmitter) / READY (Receiver) / PoW (Receiver) / ACT |
| PoE | |
| Standard | IEEE802.3af/at |
| Mode | B |
| Port | RJ45 |
| Max.Power | 25.5W Max. at RX (Powered Device) |
| 30W Max. at TX (Power sourcing Equipment) | |
| Dimensions (W x D x H) | 114 × 82 × 31 mm |
| Weight | 0.25kg |
| Casing | Aluminum case |
| Mounting Options | DIN-Rail or Wall Mount |
| Environmental | |
| Operation Temperature | -10°C to 60°C (14°F to 140°F) |
| Storage Temperature | -40˚C to 85˚C (-40˚F to 185˚F) |
| Relative Humidity | 5% to 90% non-condensing |
| MTBF | > 100,000 hrs |
| Regulatory Approvals | |
| ISO9001 | |
| FCC Part 15 Class A | |
| EN55022 Class A | |
| Surge Protection | |
| RJ45: 1KV | |
| BNC: 2KV | |
| Power: 500V | |
Features
· PoE+(30W) and Power over Shielded Twisted Pair
· 802.3af/802.3at Compliant
· Data Rate up to:90Mbps (Downlink), 90Mbps (Uplink)
· Max.Distance:400m over Shielded Twisted Pair Cable (26AWG)
· Accept 48~57VDC external power input or PoE power input from RJ45 port(Receiver side)
· Support DIN-Rail & Wall Mount installation
· -10°C to 60°C (14°F to 140°F) operating temperature
Warranty
· 3-Year Warranty
Typical Application
Power vs. Distance Chart
Test condition :
Telephone cable : MUST use twisted pair and 26AWG
Ethernet cable : Cat5e or Cat6
| Twisted pair 26AWG Telephone Cable @ 27℃ | ||||
| Telephone Cable Distance | Maximum Date Rate | PoL Output Power (Watts) | Telephone Cable Environment | Power Supply |
| 100 Meters | 100Mbps | 16W | Dispersed cable | 48VDC / 1.6A |
| 200 Meters | 100Mbps | 7W | Dispersed cable | 48VDC / 1.6A |
| 300 Meters | 98Mbps | 3.5W | Dispersed cable | 48VDC / 1.6A |
| 400 Meters | 30Mbps | 2W | Dispersed cable | 48VDC / 1.6A |
Ordering Information
| Ethernet over UTP Extender with PoE | |
| Model | Description |
| LNK-ET1100P-T | Transmitter of 10/100Base-TX(PoE+) Ethernet Over Shielded Twisted Pair with PoW |
| LNK-ET1100P-R | Receiver of 10/100Base-TX(PoE+) Ethernet Over Shielded Twisted Pair with PoW |
| Mounting Options | ► Default DIN-Rail Bracket installed, Wall Mount Bracket is included. |
| Power Options | ► 76.8W/1.6A 48VDC DIN-Rail Power Supply. Open Wire for Terminal Block |
| ► Power Supply is to be purchased separately | |
