|
[China]
Trade Verify
Address: 5F, Building D South, Jinshenghui Science Park, No. 3, Dafu Road, Fucheng Street, Guanlan, Longhua District, Shenzhen, China
Contact name:Michael Guo
E-link China Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
Overview
The DVI KVM Fiber Extender (including DVI Optical Transmitter & Receiver) adopts the uncompressed digital HD video and high-speed digital optical fiber transmission advanced technology. It can transfer signal source(computer signal source, DVI signal source high digital DVD/DVR) to long distance terminal easily, with strong anti-interference performance, ensure the signal completed and stable.
Features
· Full digital, Uncompressed HD optical fiber transmission
· Support Full HD 1920*1200@60Hz
· The attenuation of optical module SFP low to -3db
· 1 channel analog audio(3.5mm)
· Support DVI 1.0 Protocol
· Support KVM
· Automatic identification and configure display mode
· Automatic equalization inside, stable and clear graphics.
· ESD protection circuit inside, to ensure the ESD damage.
· Easily to installation, plug and play, no need to set up
Technical Indexes
| Temperature | -5°C to +75°C | ||||||||||||||||||||
| Humidity | 5 to 90 % RH (no condensation) | ||||||||||||||||||||
| The signal of Input and output | DVI-I | ||||||||||||||||||||
| Protocol | DVI1.0, HDCP1.2 | ||||||||||||||||||||
| Pixel band width | 165MHz | ||||||||||||||||||||
| Video format |
| ||||||||||||||||||||
| The signa of Audio input and output | 3.5MM Audio | ||||||||||||||||||||
| Audio format | 44.1K,48K,96K,176K,192K | ||||||||||||||||||||
| RS232 port | 3 ports industrial terminal | ||||||||||||||||||||
| RS232 Baud rate | Support 115200 and all below | ||||||||||||||||||||
| RS 232 Data bits | 8 bits | ||||||||||||||||||||
| KVM receiver port | A USB port | ||||||||||||||||||||
| KVM transmitter port | B USB port | ||||||||||||||||||||
| Fiber port | LC | ||||||||||||||||||||
| Fiber module | SFP single mode | ||||||||||||||||||||
| Fiber wavelength | 1550/1310nm | ||||||||||||||||||||
| Fiber band width | 3Gbps | ||||||||||||||||||||
| The Maximum transmission distance of DVI and Audio | 10KM 20KM 40KM 60KM | ||||||||||||||||||||
| Input voltage | DC 12V,inside+ outside- | ||||||||||||||||||||
| Power consumption | DVI receiver 4W DVI transmitter 4W | ||||||||||||||||||||
| Device size | 109.5*152*29.3mm(length*width*height) | ||||||||||||||||||||
| Packing box size | 328*273*90mm(length*width*height) | ||||||||||||||||||||
| Weight | 1500g |
Panel
Transmitter:
Receiver:
| Interface | Transmitter and Receiver |
| DVI_IN | DVI signal input port |
| DVI_OUT | DVI signal output port |
| OPT | Fiber input port |
| AUDIO_IN | Audio input port |
| AUDIO_OUT | Audio output port |
| DC-12V | 12V Power port |
| R T G | RS232 port R(receive) T(transmit)G(ground) |
| PC | USB port to connect computer |
| KEYBOARD/MOUSE | Connect to keyboard and mouse |
| DC-12V | 12V Power port |
| Indicator Light | DVI Transmitter | DVI receiver | |
| OPTICAL | On | Optical signal on | |
| Off | No optical signal | ||
| VIDEO | On | Video signal on | |
| Off | No Video Signal | ||
| RUN | On | Device works smoothly | |
| Off | Device not works smoothly | ||
| POWER | On | Power on | |
| Off | Power off | ||
Application Diagram
Ordering Information
| Item | Description |
| LNK-DVI-1V1A1D | DVI KVM Extender: DVI 1.0 Protocol, 1Ch Analog Audio, Support KVM, SFP port (3G), including 1 transmitter & 1 receiver, used by pairs |
