|
[China]
Trade Verify
Address: 5F, Building D South, Jinshenghui Science Park, No. 3, Dafu Road, Fucheng Street, Guanlan, Longhua District, Shenzhen, China
Contact name:Michael Guo
E-link China Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
Overview
The LNK-10G-MC Series is a 10 Gigabit Fiber Ethernet Media Converter. It offers conversion technology by providing one 10GBase-T RJ-45 port and one pluggable 10GBase-X fiber SFP+ port or XFP port. The open SFP+ or XFP port supports a wide variety of E-link 10GE SFP+ or XFP fiber modules, as well as third party MSA compatible SFP+ or XFP modules.
The LNK-10G-MC Series is a copper to fiber 10Gbps Ethernet media converter based on IEEE802.3an and IEEE802.3ae. With SNMP and Web-based management in the LNK600-R16, the Network administrator can monitor, configure and control the activity of each card in the chassis. This converter uses Cat.6a/Cat 7 twisted pair cable as copper transmission media with RJ-45 and 10G optical solution with SFP+ or XFP. The data stream can be converted bi-directionally from 10GBase-T to 10GBase-R and vice versa. With full duplex wire speed forwarding capability between these two media, The LNK-10G-MC brings you the best and simplest solution for the 10G Ethernet conversion between copper wire and fiber.
Technical Indexes
| Module Card | SFP+ Module Card | XFP Module Card | |||
| Type A | Type B | ||||
| Interface | Port A | SFP+ | XFP | ||
| Port B | RJ45 | RJ45 | |||
| Transmission Speed | 10G | 10G | |||
| Data | Technical Indexes | ||||
| Protocols | IEEE802.3an(10Gbase-T), IEEE802.3ae(10Gbase-SR/LR/ER/ZR) | Access Type | 10G LAN | ||
| Transmission Distance | SFP+ module: Up to 80Km 10Gbase-T: 100meters Cat .6a cable | ||||
| Maximum Packet Forwarding Rate | 14,880,950/S | ||||
| Network management information | • Card type information • SFP+ or XFP fiber module detection • SFP+ or XFP fiber module DMI function (Temperature, Voltage, Optical power) • Link status detector • Enable/Disabled Loopback test function • Enable/Disable PRBS Generator and checker function • Rate select (10Gbase-Lan or Wan) • Remote card's status monitor (only in pairs) | ||||
| Power requirement | Rack-mountable : AC 85 ~ 220V OR DC -48V Standalone: AC 220V OR DC -48V Power consumption: ≤9W | ||||
| Work Environment | Operating Temp: 0~ 50 ℃ Storage Temp: -10~ 70 ℃ Humidity: 5%~90% (non-condensing) | ||||
| Dimension | Card :11.5mm(W)×78mm(D) Standalone :156mm(W)×128mm(D)×32mm(H) | ||||
Features
Application
Connection between fiber to copper 10Gbps Ethernet equipment function as fiber-to-copper media converter for long distance transmission up to 160km
10G SFP+ Fiber Ethernet Media Converter with Build-in Power Supply.
